38
43
41
44
42
40
39
45
36
37
XLR Connector
– Connects microphone to the transmitter module for signal input
Locking Ring
– Locks microphone to the transmitter
Optional Pouch
– For lavalier bodypack operation (with beltclip and strap ring for
securing)
Gain Control Switch
– Adjusts the input sensitivity (LO or HI)
Low Battery LED
– Single flash (power on), lit steady (low battery)
Power Switch
- Turns the power ON/STANDBY/OFF. In standby position, the power is
on and the audio is off.
Phantom Power ON/OFF Switch
– Turns the phantom power ON/OFF
Battery Compartment
Release Button
– Press to release XLR connector
9V Alkaline Battery
36
37
38
39
40
41
42
43
44
45
16
XR PRO SERIES OVERALL SYSTEM PERFORMANCE
Frequency Response
25-20,000 Hz, +/-3dB
Dynamic Range
120dB
Total Harmonic Distortion
<0.3%
RF Carrier Frequency Range
169-216 MHz
Frequency Stability
+/- 0.005%, crystal controlled
Modulation
FM (F3E), +/-20KHz max.
Operating Range
Up to 250 ft. typical (depending on site
conditions); up to 500+ feet optimum line-of-sight
TRANSMITTERS
Audio Inputs
• WHT-15
Nady DM-10D neodymium dynamic cartridge
• WLT-15/WGT-15
3.5mm mono locking jack for connecting to omni
or unidirectional lavalier mic or unidirectional
headworn mic, with phantom power (WLT-15);
or connecting to instrument cable (WGT-15)
• LINK 2™
Locking XLR jack for connecting to microphone or
cable, with selectable phantom power
Controls
• WHT-15
OFF/STANDBY/ON switch
• WLT-15/WGT-15
OFF/STANDBY/ON switch, input level adjust
• LINK 2™
OFF/STANDBY/ON, LO/HI Level, and ON/OFF
Phantom power switch
LED Indicator
Unit "ON" (single flash), Low Battery Alert
(steady)
RF Power Out
50mW (Max. allowed by FCC)
Harmonic & Spurious Emissions
>-40dB
Battery
9V Alkaline
Battery Life
Up to 15 hours
Dimensions
• WHT-15
9.5" X 1.4" Diam. (24.1 X 3.5 cm)
• WLT-15/WGT-15
4.1" X 2.4"X 0.8" (10.4 X 6.1 X 2.0 cm)
• LINK 2™
4.5" X 1.5" X 1.25" (11.4 X 3.8 X 3.2 cm)
Weight (w/o battery)
• WHT-15
6.9 oz (193 g)
• WLT-15/WGT-15
3.6 oz (101 g)
• LINK 2™
2.6 oz (71 g)
SPECIFICATIONS
17
