O P E R AT I O N
4
POWERING AND CHARGING THE WLPA-35
Plug the external provided AC/DC Adapter (11) into the DC Charger Input jack (7). Then
plug the AC/DC adapter plug into a standard 115 VAC or 240VAC outlet (The AC adapter
will detect the line voltage automatically). Turn on the unit using the Power switch (4).
(Note: To avoid damaging your unit, use only the provided AC adapter connected to the
power input jack.)
1. The WLPA-35 is powered internally using the Lithium-Ion rechargeable battery pack.
View the battery charging LED for the battery remaining status while the WLPA-35 is
connected to AC power with the provided AC adapter. If the
Battery charging LED (10)
turns red, the battery is not fully charged and should be allowed to charge while the
WLPA-35 is powered by the AC adapter. (Note: Turning off the
WLPA-35 Power switch
(4)
will allow the battery to recharge more quickly.) If the
Battery charging LED indi-
cator (10)
lights green, the battery is fully charged and ready to power the WLPA-35
alone. Shut off the
Power switch (4)
and disconnect the AC adapter. Turn the unit back
“ON” and the battery will power the unit up to 3-4 hours of continuous use, depending
on volume.
