3
Quick User Controls Guide
wGT wireless Body Pack Transmitter
12. BELT CLIP
13. INPUT JACK
14. POWER SWITCH
To power transmitter Off/On
15. LOW BATTERY INDICATOR
Indicates battery needs replacement
16. LEVEL ADJUST
Connect directly into guitar/bass output jack
17. GUITAR CABLE
17
14
15
16
12
13
OFF
ON
LEVEL
LO
BAT
Service Information
In the u.s.
If you are experiencing operational problems with your system, please refer to the Support page at
www.nady.com for assistance. Should your wireless system require service, please contact the Nady Service
Department at (510) 652-2411 for a Return Authorization (R/A) Number and service quote (if out of warranty).
Make sure the R/A Number is clearly marked on the outside of the package that you are returning.
If your unit is out of warranty, please enclose a cashier’s check or money order (or pay by credit card) per
instructions by the Nady Service Department. Ship your unit prepaid to: Nady Systems, Service Department,
6701 Shellmound Street, Emeryville, CA 94608. Include a brief description of the problem you are experiencing.
For service of a unit under warranty, please follow the instructions in the following section.
Outside the u.s.
For service or warranty matters please contact the Nady distributor in your country through
the dealer/store from which you purchased this product.
Do not attempt to service this unit yourself as
it can be dangerous and will also void the warranty.
Specifications
wGa-15 GuITar aMP
Power Output
15 Watts RMS @ 4
Ω
speaker
6” full-range guitar speaker
Impedance
4
Ω
Power Handling
20 Watts
Guitar Input Connector
¼” TS mono connector, with
automatic receiver bypass
Input Impedance
200K
Ω
Headphone Output Connector
¼” TRS stereo connector
Bass Control
+/- 12dB @ 120Hz
Treble Control
+/- 12dB @ 5KHz
Power requirements
115VAC 60Hz
Internal Fuse
0.5A 250V
Dimensions (H x w x l)
11.8” x 5.7” x 7.4”
weight
10.5 lbs
wGa-15 BuIlT-In reCeIVer
Operating Frequency
VHF single channel,
between 174-216 MHz
antenna
Wire, inside back of amp
Indicators
Audio Received LEDs on RX (green)
and TX (amber)
wGT TransMITTer
audio Inputs
3.5mm mono locking jack for
connecting to instrument cable
Controls
OFF/STANDBY/ON switch;
Input level adjust
leD
Indicator Unit “ON” (single flash),
Low Battery Alert (steady)
rF Power
Out 50mW (Max. allowed by FCC)
Battery
9V Alkaline
Battery life
Up to 15 hours
Dimensions
4.1” x 2.4” x 0.8” (10.4 x 6.1 x 2.0 cm)
weight (w/o battery)
3.6 oz (101 g)
