6701 Shellmound Street | Emeryville, CA USA 94608
T
510.652.2411 |
F
510.652.5075 |
www.nady.com
Service Information
In the U.S.
If you are experiencing operational problems with your
system, please refer to the Support page at www.nady.com
for assistance. Should your microphone require service, please
contact the Nady Service Department at (510) 652-2411 to
obtain a Return Authorization (RA) Number and service quote (if
out of warranty). Make sure the RA Number is clearly marked on
the outside of the package that you are returning.
If your unit is out of warranty, please enclose a cashier’s
check or money order (or pay by credit card) per instructions
by the Nady Service Department. Ship your unit prepaid to:
Nady Systems, Service Department, 6701 Shellmound Street,
Emeryville, CA 94608. Include a brief description of the problem
you are experiencing. For service of a unit under warranty,
please follow the instructions in the following section.
Outside the U.S.
For service or warranty matters please contact
the Nady distributor in your country through the dealer/store
from which you purchased this product.
Do not attempt to service this unit yourself as it can be
dangerous and will also void the warranty.
One Year Warranty
Nady Systems, Inc. warrants to the original consumer purchaser (U.S.A. only)
that your unit is free from any defects in material or workmanship for a period of
one year from the date of purchase. If any such defect is discovered within the
warranty period, Nady Systems, Inc. will repair or replace the unit free of charge,
subject to verification of the defect or malfunction upon delivery or shipping
prepaid to Nady Systems.
Important:
Please do not return our product to the store where it was purchased.
Nady Systems, Inc. accepts the responsibility of keeping you a satisfied
customer. This warranty does not apply to defects or physical damage resulting
from abuse, neglect, accident, improper repair, alteration, or unreasonable use
of the unit resulting in cracked or broken cases or parts, or units damaged by
excessive heat, and does not apply to batteries or damage caused by leaking
batteries. This warranty does not cover finish or appearance items nor items
damaged in shipment en route to Nady Systems Inc. for repair. You must
include proof of date and place of purchase (i.e. photocopy of your bill of sale)
or we cannot be responsible for repairs or replacement. If factory service is re-
quired, you must contact our Service Department at 510-652-2411 for a return
authorization (RA) number. Make sure the RA number is clearly marked on the
outside of the package.
Nady Systems, Inc. will not repair nor be held responsible for any units sent
without proper identification and return address or RA number clearly marked
on the package.
For service, ship units prepaid to: Nady Systems, Inc., Service Department,
6701 Shellmound St., Emeryville, CA 94608.
Using the Optional Microphone
Shock Mount
Your SCM-700 microphone can be used with the optional Nady
SSM-7
00 spider shock mount (or equivalent), which uses an
elastic suspension to isolate the microphone from vibration,
thereby lowering noise transmitted to the microphone from
the stand. This is a useful tool in many situations, such as
when the performer is tapping his or her feet, or when there
is noise pickup from the rumbling of traffic outside of the build-
ing.
To insert your SCM
-
700 microphone into the SSM-7
00
shock mount, f
irmly slide the microphone into place.
Using the Foam Windscreen or Pop Filter
The FW-700 optional foam windscreen, or the SPF-1 or
MPF-7 pop filters can also be used with your SCM-700. The
FW-700 fits over the grill portion of the microphone and is
designed primarily to decrease bass rumble (from wind noise
pickup during outdoor live or recording use. It is also useful
in keeping mouth spray out of the microphone head. The
FW-700 or either the SPF-1 or MPF-7 pop filter should be
used whenever someone is close miked to both protect the
microphone and to also eliminate “popping” from percussive
breath sounds.
Note:
Be aware that the foam windscreen will slightly attenuate the high
frequency response of the microphone.
Connecting the SCM-700
The SCM-700 can be used in live sound reinforcement and
broadcasting and in studio or live recording. It must be powered
by at least 5V DC phantom power (such as supplied by the op-
tional Nady SMPS-1X phantom power supply or a mixing console
with phantom powering), or can be plugged directly into a laptop,
desktop, tablet or smartphone using the included 3.5mm TRRS Y-
cable.
The SCM-700 can be connected to your mixer or phantom
power supply using a standard balanced 3-pin XLR mic cable.
Before connecting to a mixer directly, turn the channel to which
you’re connecting to its lowest gain setting. If you are using the
Nady SMPS-1X phantom power supply, connect in the following
order:
1. Connect the SCM-700 to the SMPS-1X
2. Connect the SMPS-1X signal output to your mixer
3. Connect the SMPS-1X to the AC power supply
(115-230VAC)
4. Turn on the SMPS-1X Power On/Off switch
5. Slowly turn up the channel gain in your mixer to the
desired level
