S P E C I F I C AT I O N S
The specifications above are correct at the time of printing of this manual. For improvement purposes, all specifications for this unit, including design
and appearance, are subject to change without prior notice.
11
1. INPUT SECTION
Input
Connector
Input Impedance
Max Level
MONO CH MIC
XLR BALANCED
2.8K
Ω
+13dBu, 3.6V RMS*
MONO CHANNEL LINE
1/4” UNBALANCED
10K
Ω
+17dBu, 5.5V RMS
1/4” TRS BALANCED
20K
Ω
+23dBu, 11V RMS
AUX RETURN
1/4” UNBALANCED
10K
Ω
+11dBu, 2.8V RMS
TAPE IN
STEREO RCA JACKS
10K
Ω
+18dBu, 6V RMS
INSERT INPUT
1/4” UNBALANCED
10K
Ω
+22dBu, 10V RMS
With Trim, Tape In, and Aux Return Level controls set to Mid (50%)
*With Trim set to Min (0%)
Phantom Power on XLR inputs ....................................................................................................................................................48VDC, globally selected
2. MIXER SECTION
Trim ....................................................................................................................................................................................................................Range 28dB
Channel High EQ +/-15dB ..................................................................................................................................................................12KHz, Rotary control
Channel Mid EQ +/-15dB ................................................................................................................................Variable 250Hz - 6KHz, Two Rotary controls
Channel Low EQ +/-15dB ....................................................................................................................................................................80Hz, Rotary control
Channel Aux 1, Aux 2 Eff, Pan ......................................................................................................................................................................Rotary controls
Low Cut, L-R Select, G1-2 Select........................................................................................................................................................Push-button switches
Channel faders ............................................................................................................................................................................-
∞
to +10dB, 60mm sliders
Echo Effect Time Delay ......................................................................................................................................................................................0 to 200mS
Dual 7-Band EQ +/-12dB............................................................................................63Hz, 250Hz, 630Hz, 1KHz, 2.5KHz, 6.3KHz, 15KHz 20mm sliders
Master and Group dual faders, Effect single fader ....................................................................................................................-
∞
to +10dB, 60mm sliders
3. MASTER OUTPUT SECTION
Channel Input to Main Output
Frequency Response ..................................................................................................................................................................20Hz~25KHz (+/- 3dB)
THD + Noise ..........................................................................................................................................................................................................0.04%
S/N Ratio ............................................................................................................................ -85dB (gain controls @ unity), -94dB (gain controls down)
Noise Floor ........................................................................................................................350uV (gain controls @ unity), 150uV (gain controls down
)
Output
Connector
Output Impedance
Max Level
AUX SEND 1 & 2
1/4” UNBALANCED
200
Ω
+21dBu, 9V RMS
GROUP 1 & 2
1/4” UNBALANCED
200
Ω
+18dBu, 6V RMS
CONTROL ROOM L-R
1/4” UNBALANCED
200
Ω
+8dBu, 1.9V RMS
RECORD OUT
STEREO RCA JACKS
1.4K
Ω
+21dBu, 8.5V RMS
MAIN L-R
1/4” UNBALANCED
200
Ω
+21dBu, 8.5V RMS
XLR BALANCED
400
Ω
+27dBu, 17V RMS
HEADPHONE
1/4” STEREO
12
Ω
2 x 50mW, 1.75V RMS**
**When connected to 32
Ω
output
4. POWER OUTPUT SECTION
Power Output
8
Ω
Both Channels Driven (1% THD) ....................................................................................................................................................150W RMS per side
4
Ω
Both Channels Driven (1% THD) ....................................................................................................................................................200W RMS per side
Channel Input to Speaker Output
Frequency Response ..................................................................................................................................................................25Hz~22KHz (+/- 3dB)
THD........................................................................................................................................................................................................................0.09%
S/N Ratio ............................................................................................................................-72dB (gain controls @ unity), -85dB (gain controls down)
Noise Floor ..............................................................................................................................9mV (gain controls @ unity), 2mV (gain controls down)
Amplifier Protection ..................................................Fan cooling, short circuit protection, current limiting, Speaker DC protection circuits, clip indicators,
Power ON/OFF relays for anti-thump circuit
5. GENERAL
Power Requirements ..........................................................................................................................Voltage selectable, 115VAC/60Hz or 230VAC /50Hz
Fuse Requirements ......................................................................................................................................5x20mm glass tube F.B. 8A 250V @ 115VAC
4A 250V @ 230VAC
PMX-1600
Weight ...................................................................................................................................................................................................... 35.25 lbs. (16 Kg)
Dimensions (HWD) ............................................................................................................................................6.4” x 28.7” x 17.2” (163 x 729 x 437mm)
PMX-600
Weight ......................................................................................................................................................................................................24.5 lbs. (11.1 Kg)
Dimensions (HWD) ..............................................................................................................................................6.4” x 16.9” x 17.2” (163 x 430 x 437mm)
