Nady Systems MRX-16, Руководство пользователя

Страница: 5 / 20

Quick User Controls/Connections Guide
MRX-16 Receiver
5
1. BATTERY COMPARTMENT COVER Holds one AA battery, slide to
open
2. AA BATTERY One required for operation, alkaline or NiMH
3. BATTERY COMPARTMENT Insert one AA battery for operation, note
correct polarity
4. AUDIO OUTPUT PLUG For connecting to other sound equipment
(amp or mixer) input jack
5. ANTENNA Permanently attached flexible antenna
6. RF SIGNAL LED (Green) Indicates the received signal from the
transmitter
7. POWER & LOW BATTERY LED (Red) Flashes once at power up,
continuous flashing battery needs replacement
8. ACS™ IR SYNC BUTTON Press to make the IR link download the
receiver’s selected frequency to the TX. First, turn on the transmitter
(or turn off and then on again if already on) and position its IR window
6-12” away from the RX IR window, press the SYNC button once
and wait one second for the RX to respond. If the IR data download
is successful, the receiver SIGNAL LED (6) will light indicating the
transmitter is locked in and transmitting.
9. CHANNEL SELECT DIP-SWITCH Select one of 16 pre-set channels
per MRX-16 DIP-Switch Frequency Selection Chart (see page 16)
10. VOLUME CONTROL Adjusts the audio output level—at maximum
setting the gain will be about +4dB over a direct instrument-to-cord-to-
amp connection
11. POWER SWITCH Select OFF/MUTE/ON (MUTE=power On, audio
output highly attenuated)
12. ACS™ IR SYNC INFRARED LED WINDOW For downloading
selected Channel (Frequency) to transmitter