background image

System Features

4W-1KU Receiver

Unsurpassed state-of-the-art PLL UHF 

• 

performance with 120dB dynamic range 
and operation up to 500 feet line-of sight
Four complete and independent wireless 

• 

receivers with 1000 user-selectable UHF 
frequencies for simultaneous operation 
of four transmitters
True Diversity circuitry with two complete 

• 

front ends per receiver for maximizing 
range and most effective elimination of 
signal dropouts
AUTO-SCAN for easily locating clear 

• 

channels and ASC

 (Auto-Sync Channel) 

IR download feature which sends selected 
Group/Channel information to transmitter 
via IR sender for easy frequency 
synchronization
Sophisticated IF filtering for simultaneous 

• 

operation of multiple systems in the 
same location
Front panel touch control buttons and 

• 

user-friendly LCD configuration menus
Front panel backlit LCD display indicates 

• 

selected Group, Channel, RF signal 
strength meter; Audio Output Volume 
level; Diversity A/B LED indicators
Back panel Balanced XLR Mic level and 

• 

Unbalanced ¼” SUM Line level audio 
output jacks, squelch control, RF BNC 
connectors for dual removable ½ wave 
antennas, and DC power input jack supply
Externally powered (adapter included)

• 

Rugged all-metal housing— 1U rack 

• 

mountable with supplied rack ears 
(front antenna mount kit optional)
Works with any four combinations of 

• 

available instrument, handheld and 
lavalier UHF transmitters

HT-1KU Handheld and 

BT-1KU Bodypack Transmitters

Choice of transmitters: HT-1KU or BT-1KU, 

• 

all with 1000 easily selectable channels: 
manually with up/down buttons on units or 
via IR Sync download of selected channel 
for easy synchronization with receiver
HT-1KU Handheld transmitter features a 

• 

sleek, durable all-metal housing; power 
Off/On switch; internal antenna system; 
and superior neodymium cartridge for 
clear, powerful audio, maximum feedback 
rejection, and minimal handling noise
BT-1KU bodypack transmitter (choice of 

• 

three versions: LT, LT/HM, or GT) features 
road worthy all-metal case; power Off/
Mute/On switch; flexible external antenna 
rod; and mini locking connector for lapel 
(LT), Headmic

 (LT/HM), or instrument 

(GT) applications
HT-1KU and BT-1KU transmitters feature 

• 

LCD displays indicating selected Group, 
Channel, Audio Input Levels, and Battery 
level status; transmitting High/Low RF 
power switch for optimizing distance 
operation depending on application; 
and operation with two AA batteries 
(alkaline or rechargeable NiMH) for 
longest reliable, economical battery life

3

Содержание 4W-1KU





















Отзывы: