Nady Audio XA-1100, Руководство пользователя

Страница: 10 / 12

SPECIFICATIONS
10
POWER SPECIFICATIONS XA-900 XA-1100 XA-1600 XA-2100
2
Ω
400 + 400 730 + 730 860 + 860 1050 + 1050
4
Ω
300 + 300 475 + 475 675 + 675 840 + 840
8
Ω
200 + 200 300 + 300 420 + 420 530 + 530
Bridged 4
Ω
675 1100 1600 2100
ELECTRICAL SPECIFICATIONS XA-900 XA-1100 XA-1600 XA-2100
INPUT SENSITIVITY
INPUT IMPENDANCE
FREQUENCY RESPONSE
(at 10dB below rated output power)
VOLTAGE GAIN 32dB 34dB 34dB 33dB
DISTORTION (SMPTE-1M)
S/N RATIO
GENERAL SPECIFICATIONS XA-900 XA-1100 XA-1600 XA-2100
The specifications above are correct at the time of printing of this manual. For improvement purposes, all specifications for this unit,
including design and apperance, are subject to change without prior notice.
EIA OUT POWER
1HZ, THD MAXIMUM 1%
BOTH CHANNELS
20Hz~20KHz +/-1dB -3dB points:5Hz~50KHz
10K
Ω
Unbalanced & Balanced
<0.03%
100dB
Full short circuit, open circuit, thermal, ultrasonic, and RF protection; stable into
reactive or mismatched loads; ON/OFF muting; current limiter (crowbar)
PROTECTIONS
CONTROLS
INDICATORS
CONNECTORS
POWER SUPPLY
FUSES
DIMENSIONS
WEIGHT
Front: Power switch, 40 dentent input level control for each channel. Rear
Parallel/Mono/Bridge selector, ground lift switch, AC voltage selector switch
SIGNAL 2x green LED
CLIP: 2 x red LED
POWER: 2 x green LED
PROTECT: 2 x red LED
POWER: IEC power cord jack
INPUT: Active balanced XLR and 1/4” 6.3mm) TRS
OUTPUT: “Touch-proof” binding posts
Voltage selectable: 110-120V or 220~240V AC 50/60Hz
38.5lbs (17.5Kg) 41.8lbs (18.8Kg) 47.8lbs (21.7Kg) 51.8lbs (23.5Kg)
3AG, 20A/250V (X2)
19.0” x 15.7” x 3.5” (483 x 400 x 88.8mm)
1.15V (+4dBU)