mic with respect to the audio source will ensure the optimum results you are seeking in any given applica-
tion. You may experience a delay in hearing your audio input to the mic if monitoring in real time. Such a
slight delay is called “latency” and is common for many types of software used with this unit. If real time
coincidence of the input and amplifi
ed signal heard though the computer monitors is required then special
software may be required.
SPECIFICATIONS
Frequency Response ............................................................................................. 50 Hz - 15 KHz (-3dB)
Sensitivity (@1kHz, 74dB S.P.L.) .........................................................................-55 dB V/Pa (4.5mV/Pa)
Maximum S.P.L. (THD
≤
1% 1KHz) ................................................................................................... 120dB
Connector ...............................................................................................USB (for USB port 2.0 or higher)
Computer/Software ............................................... Works with most DAW audio software for PC and Mac
Analog to Digital Conversion .......................................................................... 24-bit 96KHz sampling rate
Mic Cable
10
’
(3m)
Dimensions (length x diameter) ...........................................................................7” x 2” (180mm x 50mm)
Weight
5 oz (140 g)
Material .........................................................................................................................
.......................................................................................................................................
.................................................................................................................................
....................................................................................................................................
heavy-duty plastic
Ballscreen
Steel mesh
PRECAUTIONS AND CARE
•
The microphone should never be dropped or subjected to extreme shock. Store only in a padded case to
protect it during transport.
•
Keep the microphone away from extremely high temperatures (above 140°F or 60°C )and humidity. Avoid
leaving the microphone in direct sunlight for long periods of time.
•
When using the microphone outdoors, avoid getting it wet.
•
To protect the mic cartridge and ensure the longest possible useful life, it is highly recommended that for
vocal applications, an external foam windscreen be used over the ball grille. This will prevent the buildup
of saliva and perspiration on the cartridge diaphragm, which degrades performance and shortens the
useful life of the microphone. Such a wind “sock” will also eliminate wind noise when the mic is used in a
windy outdoor environment.
FREQUENCY RESPONSE & POLAR PATTERN
SERVICE
(U.S.)
Should your Nady USB-24M require service, please contact the Nady Customer Service Depart-
ment via telephone: (510) 652-2411 or e-mail: [email protected].
(INTERNATIONAL)
For service, please contact the Nady distributor in your country through the dealer
from whom you purchased this product. The warranty card supplied with this system provides valuable
warranty and service information. Store it in a safe place for future reference. Do not attempt to service
this unit yourself as it will void your warranty.
NADY SYSTEMS, Inc.
6701 Shellmound Street • Eme
ryville, CA 94608
Tel:
510.652.2411 •
Fax:
510.652.5075 • ww
w.nady.com
-60
-70
-80
-90
(dBV/Pa)
-100
-110
-120
30
50
100
200 300 500
1k
2k 3k
5k
10k 20kHz
