Nady Audio RMX 16, Руководство пользователя

Страница: 5 / 8

1-16 CHANNELS LEVEL CONTROL
MASTER OUTPUT
LINK
HI
LOW
SERIAL:
1-16 CHANNELS LEVEL CONTROL
MASTER OUTPUT
LINK
HI
LOW
SERIAL: (1) (4)
1. POWER SWITCH
Use this switch to power unit ON or OFF. The integrated LED
will light when the unit is ON. Before turning on this unit, verify
connection to the proper voltage AC source, check all
connections and turn down the level controls of equipment
connected to the outputs.
2. BASS & TREBLE TONE CONTROLS
Adjust the relative balance of bass and treble
3. MASTER LEVEL CONTROL
Adjusts the master level of the combined individual channel
signals.
4. CHANNEL gAIN CONTROLS
Adjust the individual (1-16) channel gains
(3) (2)
(5) (6)
5. AC POWER CORD IEC CONNECTOR WITH
INTEgRATED FUSE HOLDER
This standard IEC power cord receptacle is used to connect
the AC power to your unit. It features a built-in fuse holder for
a 5x20mm, 0.5A/250V slow-blow fuse. If the fuse continuously
blows, shut of the unit and have it serviced by qualified service
personnel.
6. AC VOLTAgE SELECT SWITCH
Before plugging in the power cord, check to see that the unit is
set for the proper voltage for your area: ~115V (60Hz) or ~230V
(50Hz).
(Note: Use at the improper voltage can damage your unit
and void the warranty.)
7. HIgH/LOW OUTPUT LEVEL SELECT SWITCH
Selects either high or low output so the level can be optimized
for the connected audio equipment (amp, recording device, etc.)
8. MIXER OUTPUTS
Balanced 1/4” (6.3mm) and balanced XLR outputs
(Note: Only one output (1/4” or XLR) can be used at one time.
Do not connect to both at the same time, or the signal will be
severely distorted.)
9. PHANTOM POWER SWITCH
?
10. MIXER INPUTS
Balanced 1/4”(6.3mm) for channels 1 through 16.
(Note: Channels 6, 7 and 8 p15V phantom power for
condenser mics. These can be safely used with any balanced
dynamic mic also; however, do not connect any unbalanced
dynamic microphones to the XLR balanced inputs as they may
be damaged.)
(9)
(10)
(8)
FRONT
REAR
(7)
5
CONTROLS AND CONNECTORS