(U.S.) Should your NADY AUDIO product require service, please contact the Nady Service Department via telephone at (510) 652-2411
or e-mail at [email protected]
(International) For service, please contact the NADY AUDIO distributor in your country through the dealer from whom you purchased
this product.
O P E R A T I O N
TECHNICAL DATA
S E R V I C E
FOR YOUR NADY AUDIO PRODUCT
NADY SYSTEMS, INC. • 6701 SHELLMOUND STREET, EMERYVILLE, CA 94608
Tel: 510.652.2411 • Fax: 510.652.5075 • www.nady.com
FREQUENCY RESPONSE
Front View
16.54”
25.79”
14.17”
1” dia.
Back View
Bottom View
(1) POWER ON/OFF SWITCH w/ internal LED
(2) AC POWER CORD IEC CONNECTOR w/ internal fuse holder
Connects to the AC power cable.
Fuse:
115VAC ~ 2A 250V 20mm glass tube
230VAC ~ 1A 250V 20mm glass tube
(3) AC SELECTOR SWITCH
Before plugging in the power cord, check to see that this switch is set to the
proper voltage for your area: ~115V (60Hz) or ~230V (50Hz).
Note: Units damaged due to powering up with the wrong voltage are not
covered under warranty.
(4) INPUTS
Balanced XLR and unbalanced 1/4” & RCA inputs.
(5) OUTPUT
XLR balanced output.
(6) POWER/PEAK LED
LED lights red when the output signal is clipping. It is acceptable if the red LED
lights occasionally. If the red LED lights more than occasionally, you should turn
down the volume to avoid audible distortion and damage to the speaker. LED
green light indicates the unit is on.
Note: Speakers damaged due to clipping are not covered under warranty.
(7) LEVEL CONTROL
This controls the master volume.
(8) HIGH/MID/LOW EQ CONTROLS
(9) INPUT LEVEL CONTROLS
(10) MIC/LINE SWITCH
(4)
(5)
(1)
(2)
(8)
(9)
(3)
(6)
(7)
(6)
(10)
Front View
Back View
Bottom View
1” dia.
