5
FRONT PANEL
(1) STEREO TRS HEADPHONE OUTPUT JACKS
There.are.eight.stereo.headphone.outputs.located.on.the.front.
panel..All.eight.outputs.can.be.used.simultaneously.in.a.number.
of.configurations.detailed.below.
() VOLUME CONTROLS
Each.output.channel.features.a.rotary.volume.pot.for.variable.
adjustment.of.the.desired.output.level.
(3) POWER SWITCH WITH LED INDICATOR
This.LED.indicator.illuminates.when.the.unit.is.powered.on.by.the.
front.panel.power.switch.
The.power-on.LED.will.illuminate.when.the.power.is.“ON”..Before.
turning.on.this.unit,.verify.connection.to.the.proper.voltage.AC.
source,.check.all.connections.and.turn.down.the.level.controls.of.
equipment.connected.to.the.outputs.
REAR PANEL
(4) BALANCED LINE INPUTS
There.are.3.sets.of.balanced-line.stereo.inputs..These.are.labeled.
“A”.“B”.and.“C”...
(5) MONO/STEREO SWITCHES
Each.set.of.inputs.has.a.Mono/Stereo.pushbutton.select.switch..
Note.that.the.“L/Mono”.input.should.be.used.in.Mono.Mode.
(6) AC VOLTAGE SELECTOR SWITCH
Before.plugging.in.the.power.cord,.check.to.see.that.the.unit.is.
set.for.the.proper.voltage.for.your.area:.~115v.(60Hz).or.~230V.
(50Hz)..(Note:.use.at.the.improper.voltage.can.damage.your.unit.
and.void.the.warranty.)
(7) POWER CONNECTOR WITH FUSE HOLDER
Standard.IEC.power.cord.receptacle.used.to.connect.the.AC.
power.to.your.unit..It.features.a.built-in.fuse.holder.for.a.5X20mm,.
500mA/250V.slow-blow.fuse..If.the.fuse.continuously.blows,.shut.
off.the.unit.and.have.it.serviced.by.qualified.service.personnel.
Panel Connections, Controls & Indicators
1
2
3
4
5
7
6
