S3600 Series Installation Guide
Initial Startup after Power on of Switches
NADDOD Pte. Ltd.
16
Figure 3-3
Setting Port Connection
3. After selecting serial port, click <OK> button, the parameter setting interface for serial
connection will pop up, and set the parameters as follows: bps
115200
, data bits
8
, parity
null
, stop bits
1
and data flow control null. (In other Windows operating systems, “bps”
may be expressed as “Baud rate”; “data flow control” may be expressed as “flow
control”.)
4. After parameter setting is completed, click <OK> button, and the “Network - Hyper
Terminal” interface appears as shown in the figure.
Figure 3-4
Hyper Terminal Interface
5. Choose [
File/Properties
] menu item in the hyper terminal attributes dialog box to enter
Properties Window. Click “
Settings
” tab in the
Properties Window
to enter the Settings
window (as shown in the figure below), choose VT100 under “Emulation:”, and click
<
OK
>.
