Nadatel NCAM-370-X10, Сетевое руководство

Страница: 6 / 39

4
H.264 IP PTZ Camera Network Manual
6/39
Remote Video Monitoring
There are two ways to view video between the site and center system. In order for a proper operation, an IP address
must be set accordingly and please refer to True Manager in Chapter 3 or Remote Setting in Chapter 4 for a
further details.
Default ID : admin Default Password : 1234
Video Monitoring with Decoder System
Once the IP address is set in the remote IP address section of the decoder, the decoder system will connect to the
NCAM-370 and start receiving the video images. Normally, a monitor connected to the decoder will display video
images.
Video Monitoring using Internet Explorer
If an encoder’s IP address is entered on the Internet Explorer, the system will ask for confirmation to install Active-X
control. Once authorized, the Internet Explorer will start to display video images from the encoder as shown below.
http://192.168.10.100
SYSTEM OPERATION
2