Page 8
9. L OW VOLTAG E S Y S TE M
TE C HNOL OG Y
L E D s tatus interpretation guide
T his Nadair C entral Vacuum P ower Unit is provided with an L E D s tatus indicator to
keep you informed on the different s tates and functions during its operation. R ea-
ding the following table will allow you to identify the s tatus of your appliance by
the different behaviors of the L E D.
10. S AF E TY NOTE S
-Make certain that the work area is s afe and clear prior to ins talling your new
Nadair C entral Vacuum P ower Unit.
-Wear the neces s ary s afety clothing & equipment prior to s tart any work i.e.:
goggles , gloves etc.
-Us e the right tools & in good working order:
- Hammer
- P hillips head s crewdriver (cruciform)
- Meas uring tape
- L evel
- Drill; with wood or concrete bit of 3/8’’ (10mm)
- P liers
- Wire s tripper
S tatus
C olor
Legend
OF F
T he power cord is unplugged – No power.
G R E E N
T he power cord has just been plugged-in or the power has
been restored. T he LE D will flash rapidly for a few seconds
and will then become solid again
.
G R E E N
T he power unit is operational.
AMB E R
S top the power unit, replace the bag and clean the permanent
filter if required (after 15 hours of usage), reboot the unit by
pressing the small button for 5 seconds. T he LE D will return
to
.
R E D
T he 500 hours motor inspection is now required, otherwise
the motor may get damaged.
R E D
S top the power unit and have service done on the unit
immediately at an authorized service center.
S low blinking LE D
Fast blinking LE D
S olid – No blinking
