manualshive.com logo in svg

NAD T773 ADDENDUM, Руководство пользователя

Поделиться
Скачать
NAD T773 ADDENDUM Скачать руководство пользователя страница 11

1 1

1 1

1 1

1 1

1 1

ENGLISH

FRONT PANEL

12 TAPE MONITOR

: Press to engage the Tape Monitor loop. The signal present at the rear-panel TAPE MONITOR IN jacks will be heard. Press again

to release and return to the previously selected input.

NOTE

: Selecting any other input selection while Tape Monitor is engaged automatically releases it.

13

DIGITAL AUDIO SELECTOR

: Use to select digital audio input independently of video input to cycle through the T 773’s 6 digital audio inputs (OPT

1-2; Coaxial 3-6). Press repeatedly to step through the T 773’s digital audio inputs. The digital inputs are shown collectively as Digital 1-6 in the VFL
display’s small corner readout. Any digital input can be assigned to any video input (DVD, SAT, VCR, VIDEO 4-5, CD). The chart below shows the
default assignments; see “Input Setup,” below.

Digital Input Jack

Default Assignment

OPT 1

DVD

OPT 2

SAT

Coax 3

VCR

Coax 4

VIDEO 4

Coax 5

VIDEO 5

Coax 6

CD

NOTE

: Digital inputs take precedence: The T 773 will automatically play any active signal present at the selected digital input; if none is present,

it will “fall back” to the analog audio input assigned to that Video input.  Digital inputs can be selected OFF to listen to the analog input of a source
with an assigned digital input.

NOTE

: Changing the digital audio input via the Digital Audio Selector is a temporary setting that will be lost when the input is changed or the A/V

Receiver is cycled though Standby or OFF.  (See the section “Input Setup” below to reassign digital inputs to video or audio inputs.)

14

EXT 7.1

: Press to listen to the component connected to the T 773’s 7.1 CH. INPUT jacks (typically, a DVD-Audio or SACD-Multichannel player). The

HTR 2 remote’s [Ext. 7.1/5.1] key (“10+”) works similarly.

15

SURROUND MODE

: Use to select the T 773’s Listening Mode. Press repeatedly to step through the T 773’s Listening Modes. See “About the T 773’s

Listening Modes,” below.

NOTE

: Depending on the format of the currently selected input (digital or analog; stereo or multi-channel), different modes will be available. See

“About the T 773’s Listening Modes,” below.

16 LEVELS

: Press repeatedly to select the channel, and then use the VOLUME(SETUP) knob to adjust the levels of the T 773’s 7 channels/pairs in turn:

front-left, -center, –right; surround; surround back; subwoofer. The selected channel appears on the VFL and on-screen displays; use the
VOLUME(SETUP) knob to adjust its level relative to the others over a range of ±12 dB. Channel levels may also be adjusted via the on-screen menus;
see “Adjusting Channel Levels,” below.

NOTE

: The HTR 2 remote’s [Surr.], [Center], and [Sub]

/

keys provide direct access to those channels’ relative levels, however in this case the

level changes are only temporary and are not saved in memory.

17 TONE CONTROLS

: Press to adjust treble using the VOLUME (SETUP) knob over a ±10 dB range; press again to adjust bass, and a third time to exit

tone-control adjustment.

18 TONE DEFEAT

: Press to disable the tone controls; press again to re-enable them (for instance, to compare a tone setting to unmodified sound.

NOTE

: While TONE DEFEAT is engaged, the TONE CONTROLS key will have no effect.

19 SPEAKERS A & B: 

Press either speaker A or B or both to select the set of speakers you wish to listen to.  The Speakers A are the main set of 6 multi-

channel front and surround speakers.  The Speaker B are an auxiliary set for remote locations such as other rooms of your home.  For Speaker B
selection all surround sound sources are downmixed to stereo as shown in the florescent display.

20 VIDEO 6 INPUT

: Use these convenience jacks for occasional sources, such as a camcorder, portable MP3 or tape player, or a videogame console,

or any other analog audio, or composite or S-Video video source. Select the Video 6 input using the HTR 2 remote, or the front-panel VIDEO key.

21

PHONES

: Accepts stereo headphone using a standard 1/4-inch stereo phone plug (use a suitable adapter for headphones equipped with a smaller

plug); set the Listening Mode to “Stereo.” 

NOTE

: For headphone listening the front left/right speakers must be set to “Large” on the OSD’s Speaker Settings page, otherwise headphone bass

response will be restricted.

NOTE

: Plugging in headphones will automatically switch the T773 to “Stereo” mode.

Содержание T773 ADDENDUM

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды