POWER AMPLIFIER SECTION
Minimum continuous Power (FTC)
140W
Power output, Stereo Mode
120W
(ref. 4/8Ω, both channels driven
at rated distortion)
Simultaneous Full Disclosure Power
7 x 80W
(ref. 4/8Ω, all channels driven
at rated distortion)
IHF dynamic power, 8Ω
160W
IHF dynamic power, 4Ω
260W
IHF dynamic power, 2Ω
360W
Rated THD
<0.08% (ref. 20Hz – 20kHz)
IM distortion, rated power
<0.08%
Damping factor, 8Ω
>60
Input sensitivity and impedance
1.1V / 50kΩ
Frequency response
±0.8dB (ref. 20Hz – 20kHz)
Signal/Noise ratio
>92dB (ref. rated power, 8Ω, A-weighted)
>82dB (ref. 1W, 8Ω, A-weighted)
PREAMPLIFIER SECTION
Input sensitivity and impedance
350mV / 50kΩ
Frequency response
±0.5dB (ref. 20Hz – 20kHz)
Signal/Noise ratio
>88dB (ref. 2V, A-weighted)
AM BAND
Frequency range
530kHz - 1710kHz (120V version only, 10kHz steps)
531kHz - 1602kHz (230V version only, 9kHz steps)
Usable sensitivity
30dBu
Signal/Noise ratio
>38dB
Total Harmonic Distortion
<3%
Loop sensitivity 20dB S/N
66dBu
FM BAND
Usable sensitivity, Mono
<16.1dBf
Signal/Noise ratio, Mono
60dB
Signal/Noise ratio, Stereo
55dB
Total Harmonic Distortion, Mono
0.25%
Total Harmonic Distortion, Stereo
0.5%
Channel Separation, 1kHz
40dB
Frequency response
±1.5dB (ref. 30Hz – 15kHz)
RDS decode sensitivity
28dBu
DIMENSIONS AND WEIGHT
Dimensions (W x H x D)
435 x 170 x 431mm (Gross)
Net Weight
19.8kg
Shipping Weight
24.7kg
* Gross dimensions include feet, extended buttons and rear panel terminals.
Note: Installers should allow a minimum clearance of 55mm for
wire/cable management.
> S P E C I F I C A T I O N S
