IDENTIFICATION OF CONTROLS
FRONT PANEL
1 STANDBY BUTTON
•
Press this button to switch ON the T 757 from standby mode. The
Standby LED indicator will turn from amber to blue and illuminate
the VFD. Pressing the STANDBY button again turns the unit back to
standby mode.
•
The T 757 can also be switched ON from standby mode by pressing
any of the front panel buttons.
2 STANDBY LED
•
This indicator will light up amber when the T 757 is at standby
mode.
•
When the T 757 is powered up from standby mode, this indicator
will illuminate blue.
•
If Zone 2 is still ON and STANDBY button is pressed to switch the
T 757 to standby mode, the VFD will be extinguished but the
STANDBY LED remains illuminated blue. This indicates that Zone 2
is still active. In order to completely shut down the T 757 together
with Zone 2, press and hold STANDBY button until the STANDBY
LED turns amber.
3 NAVIGATION and ENTER BUTTONS
The navigation [
a/s/d/f
] and [ENTER] buttons have various
applications specific to given modes. The middle round button
designated as [ENTER] button; this is normally pressed to complete a
selection, procedure, sequence or other applicable functions.
AM/FM mode
Toggle [ENTER] button to switch between “Tune” and “Preset” mode.
Select “Tune” mode.
•
Pressing momentarily the [
a/s
] button will manually scan the AM
or FM band.
•
Press and hold [
a/s
]for more than 2 seconds to search up or down;
the T 757’s tuner will stop at the next sufficiently strong signal it
encounters.
•
Note that this function “wraps” - that is, it will continue to search
from one end of the AM or FM band to the other until it stops at a
strong signal.
Toggle [ENTER] button to switch between “Tune” and “Preset” mode.
Select “Preset” mode.
•
Use [
d/f
] to step up or down AM/FM Presets. Unused presets are
skipped over. Note that Presets must have been previously stored.
Refer also to the item about STORING PRESETS (AM/FM/XM/DAB) at the
LISTENING TO AM/FM RADIO section of the OPERATION page.
XM mode (120V version model only)
•
Use the front panel [
a/s/d/f
] and [ENTER] buttons in
combination with the [MENU] button to select through applicable
XM menu options.
DAB mode (230V version model only)
•
Use front panel [
a/s
] and [ENTER] buttons in combination with
[MENU] button to select through applicable DAB menu options.
4 MENU
•
Press to activate or deactivate OSD menu.
5 LISTENING MODE
•
Toggle to select through the various Listening mode options.
•
Depending on the format of the currently selected input (digital
or analog, stereo or multichannel), various listening modes are
available.
•
Refer also to the item about LISTENING MODE under the USING THE
T 757 - MAIN MENU segment of the OPERATION section.
3
4
5
6
7
8
10
D
C
B
1
2
A
12
11
9
6
ENGLISH
POR
TUGUÊS
FR
ANÇ
AIS
ESP
AÑOL
IT
ALIANO
DEUT
SCH
NEDERL
ANDS
SVENSK
A
РУ
ССКИЙ
