Video Performance
With Blu-ray’s native resolution of 1080p and pure digital transmission via
HDMI the picture quality is nothing short of stunning. Even standard definition
DVD’s get a boost from NAD’s upscaling engine with resolution to 1080p. The
T 587 also supports 1080p at 24 frames per second for the most fluid motion from
film based material (this must be supported by the TV display) avoiding the “3:2
Pull Down” motion artifacts common on DVD Players.
Audio Performance
Most Blu-ray Discs offer a true high definition audio 7.1 Linear PCM soundtrack
with 24 bit resolution, and the T 587 supports this format via HDMI. At last we have
studio master quality in a home format! Also supported are the new HD formats
from Dolby and DTS that offer ‘lossless’ compression. These can be decoded in
the T 587 and sent as LPCM via HDMI, or can be forwarded in compressed form
to another component that supports decoding. Of course the legacy formats of
Dolby Digital and DTS are also supported and sent as bitstreams via HDMI, Coax or
Optical connections. Dolby Digital Plus is a new and backwardly compatible Dolby
format that increases the bit rate considerably for improved fidelity and also offers
support for up to 10.2 channels.
There is also support for Audio CD’s and CD-R’s with MP3 or WMA decoding.
There is even a front panel USB port to allow playback of music files stored on a
memory stick or portable MP3 Player.
Exciting new features
BD Java and BD Live, when supported by the source material, offer a new level
of interactivity with your media. BD Live will connect over a broadband network
to the studio that produced the movie you are watching and will offer additional
material and alternate takes in real time to your Home Theatre.
Details that matter
The T 587 has a very fast loading time for Blu-ray Discs, typically just a few
seconds. Many BD players take over a minute before you can get picture,
sound and navigation. This may not sound like much, but it seems an
eternity if you are waiting to start watching your favourite movie. Other
nice touches not commonly found include an IR Input for integration with
advanced control and automation systems. Specially developed silicon rubber
feet isolate vibrations from the player and the environment for the best
possible performance.
With onboard decoding for the newest lossless audio codecs from Dolby and DTS
the T 587 will provide a complete HD audio and video solution to thousands of
NAD T 175, T 785 and T 775 AV Receiver owners. This cost effective upgrade, when
combined with the current generation of 1080p displays creates a state-of-the-art
Home Theatre.
> D E T A I L S
T 587 Blu-ray Disc Player
SYSTEM
Signal system
Auto/NTSC/PAL (230V version model)
NTSC (120V version model)
Laser
Semiconductor laser
Frequency response
±2dB (ref. 0dB 20Hz – 20kHz)
Signal-to-noise ratio
>100dB (A-WTD, analogue OUT)
Dynamic range
>95dB
Total Harmonic Distortion
<0.008%
LAN port
Ethernet jack, 10 Base-T/100 Base-TX
OUTPUT
Output format
Video OUT: up to 480i/576i
Component video OUT: up to 1080i
HDMI OUT: up to 1080p
Video out
1Vp-p/75Ω
S-Video (Y signal)
1Vp-p/75Ω
S-Video (C signal)
0.3Vp-p/75Ω
Component (Y signal)
1Vp-p/75Ω
Component (Cb/Cr signal)
0.7Vp-p/75Ω
Audio output level
2.0V rms (ref. 1kHz, 0dB)
HDMI version
1.3
Digital out (coaxial)
0.5Vp-p
Digital out (optical)
3Vp-p
GENERAL
Power requirements
AC 120V 60Hz (120V version model)
AC 110V - 240V 50/60Hz
(230V version model)
Unit Dimension (W x H x D)
17 1/8” x 2 3/8” x 11” *
435 x 60 x 280mm *
Net weight
7.71 lbs (3.5 kg)
Shipping weight
11.24 lbs (5.1 kg)
* Gross dimensions include feet, extended buttons and rear panel terminals.
Note: Installers should allow a minimum clearance of 2- 4 inches for
wire/cable management.
> S P E C I F I C A T I O N S
