42
GB
SYMPTOMS AND CORRECTION
Check the following guide for the possible cause of a problem before contacting service.
BEFORE CALLING SERVICE PERSONNEL
Reference
SYMPTOM
CAUSE
CORRECTION
No power.
•
The power cord is disconnected
•
Plug the power cord into the wall outlet securely.
The power is on, but the DVD player does not
work.
•
No disc is inserted.
•
Insert a disc. (Check that the DVD or, audio CD
indicator in the DVD display is lit.)
No picture
•
The TV is not set to receive DVD signal output.
•
Select the appropriate video input mode on the
TV so the picture from the DVD player appears
on the TV screen.
•
The video cable is not connected securely.
•
Connect the video cable into the jacks securely.
•
The connected TV power is turned off.
•
Turn on the TV.
No sound
•
The equipment connected with the audio cable
is not set to receive DVD signal output.
•
Select the correct input mode of the audio
receiver so you can listen to the sound from the
DVD player.
•
The audio cables are not connected securely.
•
Connect the audio cable into the jacks securely.
•
The power of the equipment connected with the
audio cable is turned off.
•
Turn on the equipment connected with the
audio cable.
•
The Digital Audio Output is set to the wrong
position.
•
Set the Digital Audio Output to the correct
position, then turn on the DVD player again by
pressing the POWER button.
The playback picture is poor
•
The disc is dirty.
•
Clean the disc.
The DVD player does not start playback
•
No disc is inserted.
•
Insert a disc.(Check that the DVD, or audio CD
indicator in the DVD display is lit.)
•
An unplayable disc is inserted.
•
Insert a playable disc. (Check the disc type, color
system and Regional code.)
•
The disc is placed upside down.
•
Place the disc with the playback side down.
•
The disc is not placed within the guide.
•
Place the disc on the disc tray correctly inside the
guide.
•
The disc is dirty.
•
Clean the disc.
•
A menu is on the TV screen.
•
Press the SETUP button to turn off the menu
screen.
•
The Rating level is set.
•
Cancel the Rating function or change the rating
level.
The remote control does not work properly.
•
The remote control is not pointed at the remote
sensor of the DVD player.
•
Point the remote control at the remote sensor of
the DVD player.
•
The remote control is too far from the DVD
player.
•
Operate the remote control within about 23 ft
(7m).
•
There is an obstacle in the path of the remote
control and the DVD player.
•
Remove the obstacle.
•
The batteries in the remote control are
exhausted.
•
Replace the batteries with new ones.
T571 manual (GB) 19/11/01 2:15 pm Page 42
