LOADING CODE-LIBRARIES
The HTRM 2 can store a different library of default NAD codes for each of its
Device Selector “pages.” If the original default library does not control your
NAD CD player, BD player, or other component, follow the procedure below
to change the code-library.
1
Begin by ensuring that the component you wish the HTRM 2 to control
is plugged in and powered-up (“on,” not merely in standby).
2
To enter the HTRM 2s Library Mode, simultaneously press-and-hold
both the desired Device Selector key and the [A/V PSET] key for 3
seconds, until the Learn LED turns green.
3
While keeping the HTRM 2 pointed toward the component, enter the
first appropriate three-digit code-library number from the table below.
4
Press [OFF]. If the component turns off, press [ENTER] to accept that
code-library number and exit the Library Mode.
5
If the component does not turn off, enter the next three-digit code-
library number from the table.
6
When you enter the correct number the component will turn off; press
[ENTER] to accept that code library number and exit the Library Mode.
LIBRARY
CODE
NAD PRODUCT
DESCRIPTION
LIBRARY
CODE
NAD PRODUCT
DESCRIPTION
100
Receiver/Processor
(Discrete ON/OFF)
300
Tuner
101
Receiver/Processor
(Toggle ON/OFF)
301
L75, L76 Tuner
102
S170
302
L70 Tuner
103
L75
303
L53 Tuner
104
Second Zone Commands
(Zone 2)
304
L73 Tuner
3112
Zone 3
305
C425
4112
Zone 4
306
C445
105
L70
307
Txx5 Series Tuner
106
L76
400
Tape Deck B
107
118
401
TAPE Deck A
108
L53
500
TV 280
109
L73
501
MR13
110
Stereo Receiver / Amplifier
502
MR20
111
Stereo Second Zone
503
PMR45
112
Txx5 Series
600
T535, T562, T585, M55
200
CD Player
601
T550, L55
201
CD Player (old)
602
T512, T531, T532, T571, T572
202
5170, 5240, 5340
603
L70, L73 BD
203
5325
604
L56
204
5060
605
T513, T514, T515, T517,
T524, T533, T534
205
M5
606
L53 BD
SEARCH MODE
If none of the codes from the table work, turn on the component and try
the “search” method as follows:
1
Enter Library Mode by simultaneously pressing-and-holding for 3
seconds the desired Device Selector key and the [A/V PSET] key, until
the Learn LED turns green.
2
Press-and-hold the HTRM 2’s [
R
] or [
T
]) key. The remote will step
through all the available codes at a rate of approximately 1 per second.
3
When the component turns off, release the cursor key.
4
Press [ENTER] to accept that code library and exit Library Mode.
5
Try a few commands. Should you prove to have stepped past the
needed code-library, re-enter the Library Mode and use the cursor key
to step back to it.
NOTE
It is possible that search mode will find code-libraries that operate, at
least partially, some other brand (non-NAD) components. However, we
can only ensure the completeness or accuracy of NAD code-libraries. We
do not support the HTRM 2’s operation with other-brand components.
CHECKING CODE LIBRARY NUMBER
1
Enter Library Mode by simultaneously pressing-and-holding for 3
seconds the desired Device Selector key and the [A/V PSET] key, until
the Learn LED turns green.
2
Press the [DISP] key.
3
The HTRM 2 indicates the current code-library by flashing its [DAC],
[CUSTOM], and [MACRO] keys.
For example, to indicate code-library #501, the HTRM 2 will flash [DAC] 5
times, pause, and then flash [MACRO] once. You might wish to make a note
of your components’ code-library numbers.
SUMMARY OF THE HTRM 2 MODES
Mode
Keys To Press (for 3 seconds)
Learn/Copy/Punch Through
Device Key + RES Key
Delete Mode
Device Key + RTN Key
Macro Record
Macro Key + Function Key
Library Mode
Device Key + [A/V PSET] Key
Back Light Timeout
DISP Key + Digit Key
Factory Reset
See “Factory Reset” above
OPERATION
USING THE HTRM 2 REMOTE CONTROL
20
ENGLISH
FR
ANÇ
AIS
ESP
AÑOL
IT
ALIANO
DEUT
SCH
NEDERL
ANDS
SVENSK
A
РУ
ССКИЙ
