WHAT’S IN THE BOX
Packed with your CI 580 you will find
•
Two detachable mains power cord
•
Terminal connector block
•
Quick Setup Guide
NOTE
Follow enclosed Quick Setup Guide to help you get started with your
CI 580.
SAVE THE PACKAGING
Please save the box and the packaging that came with the CI 580. Should
you move or need to transport your CI 580, this is the safest container to
use. We’ve seen too many otherwise perfect components damaged in
transit for lack of a proper shipping carton. So please, save that box!
INTRODUCTION
GETTING STARTED
IDENTIFICATION OF CONTROLS
1 STANDBY BUTTON
•
Press and hold this button to bring the CI 580 to standby mode.
2 STATUS INDICATOR
•
This is an indicator of network connectivity. Below is a table of the
LED blink codes and their corresponding descriptions.
LED BLINK CODE
DESCRIPTION
Short red flash, then flashing green
Powering up, rebooting
Solid red
Booting up
Solid red
Cannot boot up; drive error
Solid white
Indexing
Solid blue
Connected to network – ready to use
with Bluesound App
Flashing green
No internet gateway
Alternate flashing red and green
Upgrade mode
Flashing red
Factory reset in progress
3 ANALOG IN
•
Input for line level sources such as CD player, tuner or any
compatible devices. Use a twin RCA-to-RCA lead to connect the
source device’s left and right “Audio Output” to this input. The source
will appear as an “Analog Input” in the navigation drawer of the
BluOS App.
PREAMPLIFIER OUTPUT (1-4)
•
Connect any or all preamplifier output ports to corresponding audio
input ports of compatible amplifiers, receivers or processors.
•
Use a twin RCA-to-RCA lead to connect the left and right
“Audio Input” of a power amplifier or processor to a particular
PREAMPLIFIER OUTPUT port.
•
Audio output for each preamplifier output is dependent upon
the current or selected source of the particular Player. This is
configurable via the BluOS App.
•
Refer to the sample table below showing selected sources for
particular Players and their corresponding preamplifier or optical/
coaxial audio output. The selected Source shown is an example
only. The Source can be any media available from the BluOS App’s
navigation drawer.
SELECTED SOURCE FROM
NAVIGATION DRAWER
PLAYER
PREAMPLIFIER
OUTPUT
OPTICAL/COAXIAL
OUTPUT
1
2
3
4
1
2
3
4
Analog input
CI580-XXXX
✓
✓
Optical input
CI580-XXXX-2
✓
✓
Library
CI580-XXXX-3
✓
✓
Music Streaming Service
CI580-XXXX-4
✓
✓
© NAD CI580
BluOS Network Music Player
CI
580
1
2
© NAD CI580
100-240V 50/60Hz
SYSTEM INTERRUPT
5V-30V AC/DC
SERVICE
+12VTRIGGER
IR IN
+
-
OPTICAL
IN
LAN/USB
IN
PREAMPLIFIER OUTPUT
DIGITAL PREAMPLIFIER OUTPUT
1
4
2
3
1
4
2
3
IN
L
R
OPTICAL
OUT 1
COAXIAL
OUT 1
OPTICAL
OUT 2
COAXIAL
OUT 2
OPTICAL
OUT 3
COAXIAL
OUT 3
OPTICAL
OUT 4
COAXIAL
OUT 4
OUT
IN
3
4
5
6
7
8
9
10
4
ENGLISH
FR
ANÇ
AIS
ESP
AÑOL
IT
ALIANO
DEUT
SCH
NEDERL
ANDS
SVENSK
A
РУ
ССКИЙ