INTRODUCTION
getting Started
UNPACKING AND SETUP
what’S in the box
Packed with your C 545BEE you will find:
•
An audio cable connector
•
The CD 8 remote control with two AA batteries
•
A detachable AC power cord
•
This owner’s manual
Save the packaging
Please save the box and all of the packaging in which your C 545BEE
arrived. Should you move or otherwise need to transport your C 545BEE,
this is by far the safest container in which to do so. We’ve seen too many
otherwise perfect components damaged in transit for lack of a proper
shipping carton, so please: Save that box!
chooSing a location
Choose a location that is well ventilated (with at least several inches to
both sides and behind), and that will provide a clear line of sight, within
23 feet/7 meters, between the C 545BEE’s front panel and your primary
listening/viewing position. This will ensure reliable infrared remote control
communications. The C 545BEE generates a modest amount of heat, but
nothing that should trouble adjacent components. It is perfectly possible to
stack the C 545BEE on top of other components.
NOTE ON INSTALLATION
IMPORTANT!
Install the C 545BEE Compact Disc player on a level,
vibration-free surface. Severe vibration or operation in a tilted position
may cause the player to mis-track. The player may be stacked with other
stereo components, as long as there is adequate ventilation around it. If
the C 545BEE is placed in close proximity to a radio tuner (AM or FM), a
VCR or a television set, the operation of its digital circuits may produce
static that would interfere with reception of weak broadcast signals. If
this occurs, move the C 545BEE away from other devices or switch it off
when viewing or listening to broadcasts.
QUICK START
In case you simply cannot wait to experience the performance of your new
NAD C 545BEE, we provide the following “Quick Start” instructions to get
you underway.
Please make all the connections to your C 545BEE with the unit unplugged.
It is also advisable to power down or unplug all associated components
while making or breaking any signal or AC power connections.
plaY a cd
1
Connect a twin RCA-to-RCA lead from the L (left) and R (right) Line
Output jacks to the corresponding CD inputs on your amplifier.
2
Connect the AC cord to the C 545BEE’s AC Mains input and then plug
into an AC outlet. The Standby LED indicator embedded around the
bezel of the STANDBY button will illuminate amber.
3
Press the STANDBY button to turn ON the player. The Standby LED
indicator will turn from amber to blue and illuminate the Vacuum
Fluorescent Display (VFD).
4
Press [OPEN/CLOSE] to open the disc drawer.
5
Place a CD, label side up, in the tray’s circular recess. Be certain that the
disc is centered within the recess.
6
Press [PLAY]. The drawer closes automatically, and the disc begins to
play.
7
At any time you may press [SKIP
] to select different tracks on
the disc.
8
Press [PAUSE] if you want to stop play temporarily while keeping the
pickup at its current position on the disc. Press [PAUSE] again or [PLAY]
when you want to resume playback. Press [STOP] if you want to end
play and reset the pickup to the beginning of the disc.
6
EN
G
LIS
H
FR
A
N
Ç
A
IS
ES
PA
Ñ
O
L
IT
A
LIA
N
O
D
EU
TS
CH
N
ED
ER
LA
N
D
S
SV
EN
SK
A
РУ
СС
К
И
Й
