Line Level Input
Input impedance (R+C)
Input sensitivity, rated power
Maximum input signal
Line level Output
Tape Out impedance
Treble
Bass
Continuous output power
1
into 8Ω
Rated Distortion (20Hz - 20kHz)
Clipping power (maximum continuous power 4/8Ω)
IHF Dynamic headroom
8Ω
4Ω
IHF Dynamic power
8Ω
4Ω
Damping factor (ref. 8Ω, 1kHz)
Voltage gain
Signal / Noise ratio, A-weighted
2
THD + Noise
3
SMPTE IM
4
IHF IM
5
Headphone output impedance
Physical Specifications
Gross Dimensions (W x H x D)
Net Weight
Shipping Weight
C 316BEE
50kΩ + 100pF
200mV
7V
Source Z + 600Ω
±5dB at 10kHz
±8dB at 100Hz
40W (16dBW)
0.01%
45W
+3.5dB
+4.8dB
90W (19.5dBW)
120W (20.8dBW)
>200 (ref. 8Ω, 1kHz)
39dB
95dB (ref. 1W)
<0.01%
<0.02%
<0.01%
68Ω
435 x 79.8 x 286.2 mm
5.52 kg
6.65 kg
NAD Electronics International reserves the right to change specifications or features without notice. NAD is a registered trademark of NAD Electronics
International. All rights reserved. No part of this publication may be reproduced, stored, or transmitted in any form whatsoever without the written
permission of NAD Electronics International. © 02/2010 NAD Electronics International.
www.NADelectronics.com
1.
Minimum power per channel, 20Hz - 20kHz, both channels driven with no more than rated distortion.
2.
From CD input to speakers output, volume setting for 500mV in, 8Ω 1W out
3.
Total harmonic distortion, 20Hz - 20kHz from 250mW to rated output
4.
Intermodulation distortion, 60Hz - 7kHz, 4:1, from 250mW to rated output
5.
CCIF IM distortion, 19kHz + 20kHz rated output
Note:
Installers should alow a minimum clearance of 55mm for wire / cable management.
Features and Specifications
C 316BEE Stereo Integrated Amplifier
435mm
79.8mm
286.2mm
435mm
79.8mm
286.2mm
