ENGLISH
14
ACCESS MAIN MENU
Press front panel [
f
] button once for the Main Menu options to appear in
the display. Use front panel
a
or
s
button to select through the Main Menu
options –
Settings, Source Setup
and
System Info
.
NAVIGATING THE MENU OPTIONS AND MAKING CHANGES
Navigate through the menu options using the front panel buttons or
corresponding SR 10 buttons.
1
Press [
f
] to select a menu item.
2
Repeatedly press [
a/s
] to scroll through menu choices, options or
selections.
3
Press [
d
] or [ENTER] to select or save current selection or option and at
the same time exit or return to the previous menu.
NOTE
Menu option will remain displayed and will only turn off or default to
current Source after 1 minute of non-user interface.
SETTINGS
The “Settings” main menu allows the configuration of the following
features:
•
Tone Control
•
Treble
•
Bass
•
Balance
•
Auto Standby
•
Bluetooth Mode
•
Network Standby
•
CEC Power
•
IR Channel
•
Brightness
•
Temporary Display
•
Speaker
•
Volume Display Mode
NOTE
If the optional MDC2 BluOS D module is installed, additional MDC2
BluOS D built-in features or options will become available in the Settings
menu.
TONE CONTROL
Tone control allows the boosting or reduction of particular audio frequencies.
The tone control levels, Bass and Treble, can be turned on or off.
• On:
Tone control levels are active. At Tone Controls On, Bass and
Treble control levels are available for configuration.
• Off:
Tone controls levels are bypassed. At Tone Controls Off, Bass
and Treble control levels become unavailable or turned off from the
Settings menu.
BASS, TREBLE, BALANCE
Bass and Treble controls only affect the low bass and high treble leaving
the critical midrange frequencies free of coloration.
•
Use [
a/s
] to boost or cut Bass or Treble levels within ±7 dB range.
Balance control adjusts the relative levels of the left and right channels.
•
Press [
s
] to shift the balance to the right or [
a
] to shift the balance to
the left. Use [
a/s
] also to recover or even out the balance levels.
•
The center level setting provides equal level to the left and right
channels.
OPERATION
USING C 389
