1 mp input:
Input for a Media Player or other line-level signal source.
Use a twin RCA-to-RCA lead to connect the Media Player’s left and right
“Audio Outputs” to this input.
NOTE
If an external Media Player is connected to the front MP socket (using a
3.5mm stereo plug) while listening to a MP line-level source, the external
Media Player will be directly selected with the MP line-level source
immediately disconnected.
2 cd input:
Input for a CD or other line-level signal source. Use a
twin RCA-to-RCA lead to connect the CD player’s left and right “Audio
Outputs” to this input.
3 tuner input:
Input for a tuner or other line-level signal source. Use
a twin RCA-to-RCA lead to connect the tuner left and right “Audio
Outputs” to this input.
4 diSc input:
Input for additional line level input signals such as CD,
Mini Disc player or the output signal from a step-up amplifier for a
turntable. Use a twin RCA-to-RCA lead to connect the auxiliary unit’s left
and right “Audio Outputs” to this input.
5 aux input:
Input for additional line level input signals such as
another CD player. Use a twin RCA-to-RCA lead to connect the auxiliary
unit’s left and right “Audio Outputs” to this input.
6 video input:
Input for the audio signal from a stereo VCR (or stereo
TV/Satellite/Cable receiver) or other line-level audio source. Using twin
RCA-to-RCA leads, connect to the left and right ‘Audio Outputs’ of the
unit to these inputs.
7 tape in/out:
Connections for analog recording and playback to an
audio tape recorder of any type. Using twin RCA-to-RCA leads, connect
to the left and right “Audio Output” of the tape machine to the TAPE IN
sockets for playback. Connect the left and right “Audio Input” of the tape
machine to the TAPE OUT sockets for recording.
to make a recording
When any source is selected, its signal is also fed directly to any tape
machine connected to the TAPE OUT for recording.
8 Sub 1, Sub 2:
Unlike the full range channels, there is no power
amplifier built-into the C 326BEE for a subwoofer. Connect the SUB 1
or SUB 2 output or both to powered (“active”) subwoofers or to power
amplifier channels driving a passive system.
9 pre out:
Connections to an external power amplifier or processor, such
as a surround-sound decoder. In normal use, this should be connected to
the Main In sockets with the links supplied. To connect your NAD C 326BEE
to external processor or amplifier sections, remove first these links. Use a
twin RCA-to-RCA lead to connect the left and right “Audio Input” of a power
amplifier or processor to the PRE OUT sockets.
Always turn the C 326BEE and associated external power amplifiers OFF
before connecting or disconnecting anything to the PRE OUT sockets.
The PRE OUT output signal will be affected by the C 326BEE’s volume
and tone control settings.
IDENTIFICATION OF CONTROLS
rear panel
ATTENTION!
Please make sure that the C 326BEE is powered off or unplugged before making any connections. It is also advisable to power down or unplug all
associated components while making or breaking any signal or AC power connections.
1
4
3
2
5
6
7
8
9 10
12
16
15
14
13
11
EN
G
LIS
H
FR
A
N
Ç
A
IS
ES
PA
Ñ
O
L
IT
A
LIA
N
O
D
EU
TS
CH
N
ED
ER
LA
N
D
S
SV
EN
SK
A
РУ
СС
К
И
Й
