ENGLISH
4
QUICK START
Refer to the supplied C 298 Quick Setup Guide for basic instructions
in setting up your new NAD C 298. The following guidelines must be
observed when setting up your C 298.
1
Before setting up or making connections, ensure that the C 298 and other
devices to be connected to C 298 are unplugged or powered down.
2
Connect your speakers to the LEFT and RIGHT speaker terminals.
Connect the speaker cables to the corresponding speaker terminal
connections (R +/-, L +/-) as reflected in the C 298 rear panel. Bare wire
or loose strands from the speaker cables must not touch the rear panel
or other speaker terminals.
3
Connect the line output terminal of your external sources to the
BALANCED and/or SINGLE-ENDED ANALOG AUDIO INPUT ports using
applicable connectors.
IMPORTANT NOTES
• The blue terminals must never be connected to ground (earth).
• Never connect the blue terminals together or to any common ground
device.
• Do not connect the output of this amplifier to any headphone adapter,
speaker switch or any device that uses common ground for left and
right channels.
4
Connect corresponding end of the mains power cord to the AC mains
input of C 298 and the plug connected to a mains power source.
WARNING
For optimal performance, the C 298 requires a grounded AC receptacle
or a separate earth ground. Ensure the proper grounding of your system.
5
Maintain default settings of the following control switches’
•
LEFT and RIGHT SELECT towards BALANCED or SINGLE-ENDED
(both switches must be of the same setting)
•
INPUT SELECT to FIX
•
AUTO SENSE LEVEL to MID
6
Set the POWER switch at the rear panel to “ON” setting. The Standby
LED indicator will illuminate amber. Press front panel STANDBY button
to turn ON the C 298. The Standby LED indicator will turn from amber
to blue. Your C 298 is now powered up!
SAVE THE PACKAGING
Please save the box and all of the packaging in which your C 298 arrived.
Should you move or otherwise need to transport your C 298, this is by far
the safest container in which to do so. We’ve seen too many otherwise
perfect components damaged in transit for lack of a proper shipping
carton, so please: Save that box!
NOTES ON INSTALLATION
•
Place your NAD C 298 on a firm, level surface.
•
Avoid placing the unit in direct sunlight or near sources of heat and
damp.
•
Do not place the unit on a soft surface like a carpet.
•
Do not place the C 298 in an enclosed position such as a bookcase
or cabinet that may impede the air-flow through the ventilation slots.
Allow adequate ventilation.
•
Make sure the unit is switched off before making any connections.
•
The RCA sockets on your C 298 are color coded for convenience. Red
and white are Right and Left audio respectively. Use high quality leads
and sockets for optimum performance and reliability.
•
Ensure that leads and sockets are not damaged in any way and all
sockets are firmly pushed home.
•
Should water get into your C 298, shut off the power to the unit and
remove the plug from the AC socket. Have the unit inspected by a
qualified service technician before attempting to use it again.
•
Use a dry soft cloth to clean the unit. If necessary, lightly dampen the
cloth with soapy water. Do not use solutions containing benzol or other
volatile agents.
DO NOT REMOVE THE COVER; THERE ARE NO USER-SERVICEABLE
PARTS INSIDE.
INTRODUCTION
GETTING STARTED
