Nacecare TTB 516, Инструкция пользователя

Страница: 20 / 24

233969 / 01/13 (A20)
20
trouble-Shooting
PROblEM CAUSE SOlUtION
Machine will not operate Missing or blown fuses
Battery not connected
Low battery charge Fit or replace fuse (page 8)
Connect battery (page 8)
Charge batteries (page 19/21)
Vacuum will not operate Vacuum not turned on Turn on vacuum (page 17)
Poor water pick-up Waste-water tank full
Clogged / blocked vacuum hose
Loose hose connections
Debris basket filter clogged/blocked
Separator filter clogged / blocked
Poor separator seal
Damaged separator seal
Damaged / split vacuum hose
Damaged floor-tool blades
Low battery charge
Empty waste-water tank (page 17)
Remove and clean (page 17)
Push tight connections (page 17)
Remove and clean (page 17)
Remove and clean (page 17)
Clean and refit (page 17)
Renew (contact service dept)
Renew (contact service dept)
Renew (contact service dept)
Recharge batteries (page 19 /21)
No brush / scrub function No brushes fitted
Brush overloaded
Check and fit (page 10)
Reset machine (page 14 fig 27d)
Little or no water flow Clean-water tank empty
Clean-water tank filter blocked/ clogged
Incorrect water flow setting
Fill clean-water tank (page 11)
Remove and clean (page 17)
Adjust tap as desired (page 14)
Machine just ‘stops’ while
operating
To much load on the brush system
Blown fuse in Battery pack
Reset the machine and decrease the
brush load to best suit the floor type
(page 14. fig 27d)
Replace 40 Amp fuse (page 18)
Specifications
Brush Motor Vac Motor
Brush
Sizes
Pad
sizes
Weight
Protection
Class
Run Time
per battery pack
Power
400W 24V 300W 16” 16” 52 Kg IPx4
Hi - 35 mins
lo - 45 mins
2 x 12V (24V) 18Ahr
Area
Performance
per battery
pack
Fluid Flow
(Tap at 45’)
Brush / Pad
Pressure
Speed
Recharge
time
Cleaning
Speed
Hand Arm
Vibration
Noise Size
1050m
2
0.09 gpm
(60 mins)
27.4/
26.2 g/cm2
Hi-150 rpm
lo-130rpm
6 hrs 0-4.2Kph 0.6 m/s
2
Hi-70.3 db(A)
lo-68.2 db(A)
850mmx
1132mmx
520mm
Model ttb-516