RM03-000
001-0011 Rev. 01
Page 3 of 4
4. INSTALLATION - Continued
4.4 Grounding
The RM03-000 has two
(2) ground studs
⅝″
spaced for #6 ground wire
connections per the Service Provider or local
codes or ordinances. Refer to Figure 5 for
location.
Figure 5. Ground Stud Location
4.5 Cable Management
The
RM03-000
front plate supports optional D-rings (RM-
AC103) for grooming front access cables. D-
rings are secured to the front plate by installing
the supplied #10 screw.
The RM03-000 can also support a security
cover that fits on the cable tray to prevent
unauthorized
access
or
accidents from
damaging the front cabling and fiber adapters
or removing the VLX or LGX™ compatible
adapter panel or cassettes. The cover cane be
ordered separate as RM-AC101C or both the
cable tray and cover as a set as RM-AC100
Refer to Figure 6.
Figure 6. D-ring and Tray options
4.6 Security
The RM03-000 supports
an optional cover (RM-AC102) to prevent
unauthorized access or accidental liquids from
damaging the rear cabling and connectors.
The cover is secured with four (4) screws.
Refer to Figure 7
Figure 7. Standard Cover
5. CUSTOMER SERVICE
If technical or customer assistance is required,
please contact NAC at the following address or
phone number:
N A Communications, LLC
3820 Ohio Ave. Suite 12
St. Charles, Illinois 60174
Toll Free: 1-888-402-4622
Voice: (630) 513-1299
www.gotonac.com
6. WARRANTY & REPAIRS
6.1
Warranty
NAC warrants this product for the period
specified by the terms governing the sale of
the product. Any attempt to repair or modify
the equipment by anyone other than an
authorized NAC representative will void the
warranty.
This limited warranty does not cover any
losses or damages resulting from shipment to
or from the customer, or from improper
installation,
abuse,
modifications,
or
unauthorized repair by other than NAC
personnel.
6.2
Repair and Return
NAC equipment will be repaired or replaced
without cost during the warranty period if the
product is defective for any reason other than
