NAC Image Technology ST-839, Руководство пользователя

Страница: 68 / 370

Trigger Input (REC mode)
Trigger Input (REC mode)
Using the correct Trigger Imput for the event to be recorded.
3-22
(00400)
■ Trigger Input
Input the trigger for the event to be recorded and to stop the recording with the correct trigger timing
settings.
Press the TRIG button while in the ARM mode

After recording the number of frames set for the trigger type the camera will
automatically switch from the REC mode to the STOP mode.

On the rear panel of the camera the status LED for TRIGGER lights up in red during
trigger input and the status LED for CAM MODE lights up in orange during REC mode.

In addition to the J-PAD3 buttons, you can input using the trigger.

Input TRIG with external trigger input signals (TRIG1 ・ TRIG2) (

A
4-48)

Automatic trigger input after changing images during recording (Image trigger) (

A
4-29)

The image being recorded is shown live.

The current camera settings are shown on the screen display
with information in red and the status displayed as REC (
① ).

After trigger input, the value on the frame counter decreases
for each image recorded (
② ). Recording stops when it reaches 0
( ③ ).

“ ＊ ” is shown in the trigger time. After switching to the STOP
mode when the recording stops the input trigger time appears.
(
④ )
REC Mode Monitor and Viewfinder Display