HotShot SC User Manual
Rev 1.2.5 –March 2012
© NAC Image Technology Inc
Jimmy Robinson
12
4 Initial
Setup,
Software & Driver Installation
IMPORTANT READ THIS COMPLETLY PRIOR TO INSTALLING SOFTWARE OR
OPERATING THE CAMERA
For E64 Systems, the PC is provided Pre-Configured together with a restore facility.
To install the software you should run the install program provided with the camera.
The installer ALSO installs the drivers for the camera where necessary. So you
should install the software BEFORE you make a connection to the camera. This way
the camera will “plug and play”.
If you have an earlier version of the software installed you MUST un-install this
software FIRST. You MUST do this
WITHOUT
a connection to a camera.
4.1 Un-installing Software
If you have previous version of HotShot SC Link installed you first un-install this. You
can do this via the Windows Un-Install feature OR run the un-installer directly.
To run the uninstaller directly either :
1) Choose Un-Install from START|PROGRAMS|NAC|HOTSHOT SC {where
available}
OR
2) Run “c:\program files\nac\hotshot\unwise.exe”
After un-install you should reboot the PC
4.2 Installing Software
The Installation CD should Auto-Run. If it does not then find the install program on
the software CD supplied {Hotshot Link Install x.x.x.x.EXE – the x will relate to the
version number of the software}.
Follow the installation dialogs.
If you are using the CC camera series you should specify during the installation
process that you want to include CC camera support when prompted.
