NABO GSV 1260, Инструкция по эксплуатации, Страница: 43 / 91

Adjusting salt consumption
Table of Water Hardness Level Settings
Open the
testing
strip.
Run
water
through
your tap
for 1
min.
Keep the
testing
strip in
water for 1
sec.
Shake the
testing strip
after taking it
out of water.
Wait for
1 min.
Make your machine’s water hardness
setting according to the result obtained
through the testing strip.
Water
hardness
level
German
hardness
dH
French
hardness
dF
British
hardness
dE
Hardness Level
Indicator
1 0-5 0-9 0-6 L1 is seen on display.
2 6-11 10-20 7-14 L2 is seen on display.
3 12-17 21-30 15-21 L3 is seen on display.
4 18-22 31-40 22-28 L4 is seen on display.
5 23-31 41-55 29-39 L5 is seen on display.
6 32-50 56-90 40-63 L6 is seen on display.
1
3
Testing strip
The washing effectiveness of your machine depends on the softness of the tap water. For this reason,
your machine is equipped with a system that reduces the hardness in mains water supply. The
washing effectiveness will increase when the system is correctly set. To find out the water hardness
level of water in your area, contact your local water board or determine water hardness level by using
the test strip(if available).
• Push the programme button and hold it down.
• Turn on the machine.
• Hold down the programme button for 3 seconds until “S” and “L” are shown sequentially
in the display for 2 seconds.
• The machine will display the current setting.
• Set the level by pushing the programme button.
• Switch off the machine to save the setting.
Setting