Nabla Instruments MiniP7, Инструкция по сборке и эксплуатации

Страница: 13 / 18

11
4.3. Mounting the Front Panel
4.3.1. Front Panel
Place the Front Panel on top of the tuned PCB and fix with 6 philips-head screws
M2.5x6.
4.3.2. Knobs
After assembly of the Front Panel, it’s time to place the knobs.
4.3.3. Connecting the Power Supply.
The MiniP7 has a selectable power supply to
operate either under 12V or 15V conditions. Place
both jumpers on the right side for 15V operation
and on the left side for 12V operation.
The Power Supply Connector has its negative pointing
to the bottom edge of the PCB.