3 of 26
www.NabcoEntrances.com
GT1400StandardSingle/HurricaneSingleFoldingDoorInstallationManual
Rev 6-14-21
P/N C-00177
CHAPTER 1: WARNING LABELS
Warning labels are universal and used to alert an individual of potential harm to one’s self or to others. The following warning labels
are listed in a hierarchy order that defines the most potential danger first, and the least potential danger last. Please refer to this
page in the event that a warning label is displayed within this manual and further definition needs to be explained.
Indicates potentially dangerous situations . Danger is used when there is a hazardous situation
where there is a
high
probability of severe injury or death . It should not be considered for
property damage unless personal injury risk is present .
Indicates a hazardous situation which has some probability of severe injury . It should not be
considered for property damage unless personal injury risk is present .
Indicates a hazardous situation which may result in a minor injury . Caution should not be used
when there is a possibility of serious injury . Caution should not be considered for property damage
accidents unless a personal injury risk is present .
Attention: A situation where material could be damaged or the function impaired .
Notice: This manual and the owner’s manual must be given to and retained by the purchasing facility or
end user .
Note: Indicates important information that provides further instruction.
CHAPTER 2: GENERAL SAFETY RECOMMENDATIONS
Do not install, operate or service this product unless you have read and understand the General
Safety Recommendations and Warning Labels contained in this manual . Failure to do so may result
in bodily injury or property damage .
Read, study and understand the installation and operating instructions contained in or referenced
in this manual before operating . If you do not understand the instruction, ask a qualified
technician . Failure to do so may result in bodily injury or property damage and will nullify all
warranties .
Handle Glass With Care!!! Use caution when moving and installing the glass panels . These panels
are designed to be assembled with tempered glass . Any sharp objects that come in contact with
glass may cause the glass to shatter . NABCO Entrances is not responsible for glass that is broken
during the installation of this Unit .
If the door appears broken or does not seem to work correctly, it should be immediately removed
from service until repairs can be carried out or a qualified service technician is contacted for
corrective action .
Notice: This manual, the owner’s manual and all other associated manuals must be given to and retained by
the purchasing facility or end user .
CHAPTER 3: SCOPE
Section 3 .1 To the Installer
The purpose of this manual is to familiarize the installer and purchaser with the proper installation and operation of this system.
It is essential that this equipment be properly installed and operational before the door is used by the public. It is the installer’s
responsibility to inspect the operation of the entrance system to be sure it complies with any applicable standards. In the United
States ANSI Standard A156.10 covers the GT-1400 Fold Door System. Also in the United States all installed glass must meet ANSI
Standard Z97.1.
All automatic equipment complies with UL325 and CAN/CSA -C22.2 No 247-92. Other local standards or codes may apply. Use them
in addition to the ANSI standard. The GT-1400 is listed with the Underwriters Laboratory and is identified as such on the label.
DANGER
WARNING
CAUTION
WARNING
WARNING
WARNING
WARNING
WARNING
CAUTION
CAUTION
