Nabco Acusensor M, Руководство по установке

Страница: 5 / 28

5 of 28
www.NabcoEntrances.com AcusensorMInstallationManual
Rev 8-25-17 P/N C-00187
Specification Description
Mounting Height 78 inches to 118 inches (2.0m to 3.0m)
Weight Approximately 10 ounces (285g)
Color Black Cover or Silver Cover
Full Color LED
►
►
Displays operating status
Angled Spacer The Angled Spacer is an option that is sold separately. To do so, please call Customer Service at
1-888-679-3319.
►
►
For Slide doors only
►
►
For increased depth range.
Adjustable Detection Area
►
►
Depth
►
►
Width
ECO Mode Closes door earlier for a pedestrians moving away from door.
Table 2
Electrical Wiring
Item Description
Input Voltage 12-24 Volts AC or DC
Power Consumption 3VA or less @ 24VAC
80mA or less @ 24VDC
150mA or less @ 12VDC
Output ► ► Non-polarized semi-conductor relay, N.O. or N.C.
► ► Max. 100mA @ 30VAC/50VDC
Make sure total power consumption of all Sensors does not exceed the capability of the door control or power supply.
Exceeding the rated output may result in malfunction or breakdown.
CHAPTER 4: PRESENCE DETECTION AREA
The Sensor is used to detect changes of multiple near-infrared rays that beam from the Sensor down to various points on the floor.
These various points reflect the near-infrared rays to form an grid in the shape of a square. To more acurately monitor a Presence
Detection Area, the grid is broken into invisible rows (Depth), and columns (Width).
Notice: Width and depth of Presence Detection Area must comply with ANSI Standards.
DN 1567
Moun ng
Height
Row 1
Row 2
Row 3
Row 4
Row 5
Row 6
A B
C
D
E
F