background image

Screen-11:

 Press Enter after entering 4 scalar new password.

Screen-12: 

Reenter the password that you entered, press Enter

Screen-13:

 If passwords are corrected, “Door Opener Password is Changed” will be seen on screen.

Screen-14:

 If passwords are corrected, “Administrator  Password is Changed” will be seen on screen.

3

4-To Change Door Opener Password – DOOR PASSWORD:

 To change Door Opener Password, choose DOOR PASSWORD(Screen-6) and

press Enter. Enter new password and press Enter. (Screen-11).  Reenter the password that you entered, press Enter(Screen12). If the passwords
are corrected, “Door Opener Password is Changed” will be seen on screen(Screen 13).

5-To Change Administrator Password – ADMINISTRATOR PASSWORD: 

 To change Administrator Password, choose Administrator

Password (Screen-6) and press Enter. Enter new password and press Enter. (Screen-11).  Reenter the password that you entered, press
Enter(Screen12). If the passwords are corrected, “Administrator Password is Changed” will be seen on screen(Screen 14).

Screen-9 :

 When you see “REGISTERED”on screen, record adding operation is completed.

Screen-10 :

 If you want to add another name and number, you can continue by pressing Enter. If you want to quit,

you can go to main screen by pressing DEL (*).

RECORD

ENTER (SELECT)

DEL (BACK)

SCREEN-10

PRESS ENTER BUTTON
FOR NEW RECORD

SCREEN-9

REGISTERED

SCREEN-11

ENTER (SELECT)

DEL (BACK)

ENTER 4 SCALAR
NEW PASSWORD

SCREEN-12

ENTER (SELECT)

DEL (BACK)

REENTER THE NEW
PASSWORD

SCREEN-13

ENTER (SELECT)

DEL (BACK)

DOOR OPENER PASSWORD
IS CHANGED

SCREEN-14

ENTER (SELECT)

DEL (BACK)

ADMINISTRATOR PASSWORD
IS CHANGED

6- Speed Call from Panel: 

While main screen is on display (Screen-1 or Screen-2), speed call screen is displayed  by using

keypad. (Screen-15) After flat number is entered and pressed Enter, if flat number is correct, CALLING (Screen-16 )will
be seen on screen. If flat number has a name in guide, recorded name will be seen on screen too. (Screen-16)

SCREEN-15

ENTER (SELECT)

DEL (BACK)

12

SCREEN-16

ENTER (SELECT)

DEL (BACK)

12

AKIF

CALLING

7-Speed Call from Guide:

 While main screen is on display(Screen-1 or Screen-2), by pressing Enter, Screen-17 is diplayed.

NA-DE

ENTER (SELECT)

GUIDE

MENU

DEL (BACK)

SCREEN-17

ENTER (SELECT)

DEL (BACK)

SCREEN-18

1    

 AHMET TASDEMIR

2   MURAT BOZKAYA
3   ALI BOZKURT
4   OSMAN GORMEZ
5   HAMIT KARA
6   ALI RIZA GOZUKARA

ENTER (SEÇ)

ENTER DOOR OPENER
PASSWORD

DEL (GER‹)

SCREEN-19

1-Outdoor opening by Password:

 While main screen is displayed (Screen-1 or Screen-2), if DEL(*) is pressed, Screen-19 is displayed. Enter door opener

password, and press Enter. If the password is correct, Scrren-20 is displayed and central unit opnes out door by controlling door opener. ‹f the password
is wrong, Screen-21 is diplayed and panel turns to main screen. If you didn’t change your door opener password, default door opener password is 1234.
If you want to change your door opener password, follow the 4. Step.

SCREEN-20

PASSWORD IS ACCEPTED

SCREEN-21

INCORRECT PASSWORD!!!

X

Screen-17: 

 You can enter menu or guide pressing Enter button using left (number 4), right (number6) buttons. We will enter Menu.

Screen-18: 

When guide is selected, registered names are displayd as shown in Screen-18. By up (2 button) - down (0 button) arrow

keys flat is chosen and Enter is pressed. Then, as shown in Screen-16 “CALLING” is displayed with the registered names and that flat
is called.

Содержание GNDK

































Отзывы: