SFRA45 User Manual
8-15
input current and voltage. This phase angle has three
options: “
-180° to +180°”,
“
0° to -360°”
or “
0° to +360°”
depending on user
preference.
Keyboard Beep –
An audible ‘beep’ is available and
sounds every time a key is pressed. This option can be
“enabled”,
or
“disabled”
if the sound is not required.
Step Message –
Has two options
“enabled”
or
“disabled”.
A single line message appears on the display
in real time
mode when stepping the frequency or amplitude up or
down using the arrow keys. It shows the new value
selected. The ‘step message’ may be disabled if desired.
User Settings –
This function is accessed by pressing the
system key followed by the ‘right arrow’ key, this will then
display the screen in figure 14.1. This allows the “user” to
enter three separate lines of information which are saved
in a data file when “
save
” is selected and ENTER pressed.
User Data, Example
.
(Default 1
st
“Newtons4th Ltd”, can be overwritten).
Figure 14.2 is an example, which in this case shows the
station name, line number and technician name. The third
‘user data’ line (ie technician name), is the data displayed
on the
‘PROGRAM STORE/RECALL’
display screen
