Setup and Connections
ESERV-1xT Serial Servers
16
ESERV-1xT
(Rev. 1210)
Figure 14.
Paired Mode Setup
To set up a Paired Mode connection:
1.
Connect two serial servers to serial devices and to the network.
2.
Configure the serial server for Paired Mode operation (using the Ethernet Serial Server
Manager or the web interface).
INITIATING A HARDWARE RESET ON THE SERIAL SERVER
To initiate a Hardware Reset on the serial server
, press and hold the Mode switch for 0 to 2 seconds, and then
release it. The LED indicators respond as follows:
1.
The Ready LED blinks three times per second while the button is being pressed.
2.
The serial server is in Reset Mode when:
a.
On the ESERV-11T: Port 1 LED is On and the Ready LED is Off.
