2
Checking the Image length and verifying checksum
Checksum Satisfied, Saving image to flash..
Downloaded Image Size:[xxxxxxx] Bytes
May take a few Minutes.....
...........................................................................................................................................................
...........................................................................................................................................................
.......................................................................................................
Do you Want to Restart the System Now: [y/n] y [Enter]
Do you Want to Save the Configuration: [y/n] n [Enter]
Device is Going for Reboot....
Once unit has rebooted, manually cycle the power on the 7014 and verify the update has been
processed.
Hit <ENTER> to login
[Enter]
Allowing Serial Session
Product Name
: N-TRON 7000 Series
Product Configuration
: 7014xxx
Product Software Version
: x.x.x
Product BOOT ROM Version
: LOADER1.20
Product Build Date
: xxx xx xxxx at xx:xx:xx
Product CopyRight
: N-TRON Corp.
Product URL
: http://www.n-tron.com
N-TRON Managed Switch
login:
admin [Enter]
Password:
admin [Enter]
N-TRON/Admin#[1]>
config erase [enter]
Load Factory Default Setting? [y/n]
y [enter]
Keep IP, SubNet and Gateway Addresses? [y/n]
n [enter]
Restart the switch to effect this change
N-TRON/Admin#[2]config>
(manually cycle power of switch)
