(Revised 2011-07-13)
54
CLI\SWITCH\PORTS>link10h
Enter ports to advertise 10Mb and half duplex:
Use commas to separate port numbers. (Example: '3,6,12,14,22<enter>'.)
Enter Port Numbers (or ESC to exit):12,13
CLI\SWITCH\PORTS>
Example of the Ports filter screen:
CLI\SWITCH\PORTS>filter
The threshold for collision filter management is 10 collisions in 20 seconds.
Would you like to change it ? Enter 'YES' or (NO):
CLI>
Enter ports to apply collision filter to:
Use commas to separate port numbers. (Example: '3,6,12,14,22<enter>'.)
Enter Port Numbers (or ESC to exit):1,7,19
CLI\SWITCH\PORTS>
Example of the Ports info screen:
CLI\SWITCH\PORTS>info
These ports are Enabled: all
ALL RJ45 ports are now set to autonegotiate for speed and duplexing.
Ports 25 and 26 are set to 100 Mb and Full Duplex.
These ports advertise 10Mb and half duplex: none
At 10 collisions per 20 seconds, when power is cycled, these ports
are filtered: none
These ports are forced to 10 Mb speed:none
These ports are forced to 100 Mb speed: 25 26
These ports are forced to Half Duplex:none
These ports are forced to Full Duplex: 25 26
These ports are forced to Crossover:none
Squelch is now normal.
CLI\SWITCH\PORTS>
