N-Patrol Commercial DVR system, Руководство пользователя, Страница: 33 / 60

N-Patrol Commercial DVR Manual
1. PTZ position will influence the PTZ control. e.g.: if you set it as an obverse and press left, then
it will turn left. If you set it as the inverse and press left, then it will turn right.
2. If there is (H) after the PTZ protocol, it has the function of a high-speed Preset. If there is no (H),
then it only has the function of PTZ control.
3. The PTZ address here is the one that the system will send the orders to. Take note that some of
the addresses begin from 0 and when the address number is 1, the real address should be 0. If you
set 1 and the order sent out is 1, which is different from the real address, the device will not
function. At this time, you should set the address number as 2.
a.
DO Port Name: Enter a description for the DO Port. If the alarm input is in use and there is an alarm in
these cameras, then the alarm will be sent to the client automatically. The client only connects to the
cameras with alarms.
b.
c.
Select whether to send an alarm to the
network client or not.
d.
Select a “.wav” sound file for a camera alarm. When the alarm is triggered, the sound file will be
played.
e.
Select which DO ports respond with the alarmed camera. All connecting devices will send alarm
messages when there is a Motion Detection.
Schedule Setup (Example for below figure)
N-Patrol Technologies Inc. |
www. npatrol .com
33