7
Changing the Cutting Head
1)
Loosen knurled screw and remove support plate with adjusting collar.
2)
Press release button and engage drive shaft.
3)
Loosen cutting head counter clockwise with hook wrench (supplied).
1 = Support plate with
adjusting collar.
1 = Release button.
2 = Drive shaft.
For refitting, proceed in reversed order. It will suffice to tighten the cutting head to hand tight with the hook wrench.
Changing the cutting inserts
1) Loosen cutting insert fastening bolt with torx wrench (T 10, supplied) and remove cutting inserts. Repeat this
procedure in the same way for each of the three cutting inserts.
2) Rotate or replace cutting inserts.
3) Refit cutting inserts with fastening bolt (tighten to hand tight).
There is no need to remove the cutting head when changing the cutting inserts. It will suffice to turn home the support
plate with the adjusting collar.
1 = Cutting insert.
