N.KO 25300, Руководство по эксплуатации

Страница: 3 / 22

3
1. General information
Thank you for purchasing one of our machines, and we hope that you will be fully satisfied.
This guide provides instructions for the installation, adjustment, operation and
maintenance of the machine B10 ELECTRA in compliance with valid safety standards.
The information and data contained in this document subject to changes due to
further improvement of machinery. To eliminate any doubts, when differences are
detected, please contact N.KO Machines.
Never perform any operation on the machine before you read the instructions in the
manual and understand them. Major part of accidents that happen in the workplace are
due to the fact that the guidelines and recommendations contained in the manual are not
complied with.
The graphic symbols used in the manual are intended to emphasize the important
information regarding the safety and operation of the machine.
Attention :
Information important for the personal safety of the operating staff.
Important:
Instruction that needs to be observed to ensure the proper function of the machine.
2. Machine description B10 ELECTRA
Machine B10 ELECTRA is designed solely for the activities below:
B10 ELECTRA is designed solely for bevelling and fetch fettling of metal materials in the
workshop or in the production hall.
This includes manual and manually managed machine. The main feature of the machine
is the ability to machine flat and shaped workpieces, openings, and tubes. The
machining angle can be changed by replacing the milling head. B10 ELECTRA can
perform also the workpiece edge rounding. This application also requires a special tool,
see the text below.
Use the machine in the environment protected from rain, snow, and other adverse
weather conditions.