Caution
Do not use any other charger except one ( 9V / 2.5A ) provided. Plug to
the wall facing “ DC 9V sticker” upside. When cradle charging, check if
tightly the plugged as shown on left picture. Make sure to handle it
gentle; damage with excessive force may cause no warranty.
Incongruent change of battery can cause the explosion.
When attached battery is completely discharged, plug charger to main
body, then reset the device to check if screen is back on. To use, do at
least 10 minute charging.
* When charging, the status of the battery attached to main body can be confirmed by the LED
left of upper corner of main body. Also the status of Sub-battery can be confirmed by the LED
right of low corner of Cradle
◎
Option of N-Gen
Option List.
Type
Details
Barcode Scanner
2D Laser Type
Opticon 38400bps serial
8
