N-Com B901-R, Инструкции пользователя и правила безопасности, Страница: 15 / 36

15
7.1. Speed dial
Using the N-Com EASYSET program or the N-Com EASYSET App, you can store
up to 3 of your favourite numbers, which you will be able to dial from the
“
Speed Dial ” menu.
Saving the Speed Dial numbers
To assign one or more speed dialling numbers:
•
Put the system in the “Configuration” mode: starting from a switched off system, press the “ ON ”
key and keep it pressed for 4 seconds, until you hear the voice announcement “ Configuration
Menu
”.
•
Press the “
5
” or “
6
” key until you hear the voice command “ Speed dial ”.
•
Press the “ ON ” confirmation key. You will hear the voice announcements “
Speed dial 1
” and
“ Phone connected ”.
•
Press the “
5
” or “
6
” keys to select the speed dialling number to be assigned. The saved position
is confirmed by the voice announcement “
Speed dial 1
“/ “
Speed dial 2 ” / “ Speed dial 3
”.
•
On your own mobile phone (paired up and connected to the N-Com system), call the phone
number you wish to assign to the selected speed dialling position. The call is interrupted before it
goes through, and the selected number will be saved; at this point you will hear the special voice
announcement confirming the selection (“
Save Speed Dial 1
” / “
Save Speed Dial 2
” / “
Save Speed
Dial 3
”).
Using the stored numbers
To access the “Speed Dial” menu, press at the same time the “ ON ” and “ n ” keys (“ Speed Dial ”), then
use the “
5
” and “
6
” keys to scroll through the menu items.
Then press the “ ON ” key to confirm the selection of one of the following items:
•
Last number redial
•
Speed Dial 1
•
Speed Dial 2
•
Speed Dial 3
•
Cancelled
If you wish to exit the “Speed Dial” menu, press the “
5
” and “
6
” keys until you hear the command
“ Cancelled ”, then press “ ON ” to confirm.
N.B. : If no key is pressed within 15 seconds, the system exits the “Speed Dial” menu.
7.2. Conference call function
When a call comes in on a mobile phone connected via Bluetooth to B901, the intercom is
temporarily turned off. However, if you wish to share the phone call with the other helmet, simply
turn on the intercom manually during the phone call.
Turning on the phone conference
call function
During the phone call, briefly press “ n ” (channel 1).
During the phone call, press the “ n ” key twice (channel 2).
During the phone call, press the “ n ” key three times (channel 3).
Turning off the phone conference
call function
During the phone call, briefly press “ n ”.
N.B. : “Telephone Conference” function can only be used with the N-Com series “600”/”900”.