14
Position both the comfort cheek pads in their housing (see specific instructions
provided in the helmet user manual) making sure that all the press-studs click.
Note: Carefully check the proper final positioning of the cheek pad, pulling the chinstrap
toward the inside of the helmet and testing the press-studs.
Caution: Make sure that there are no cables sticking out of the helmet and that the
loudspeakers are in their housing.
Caution: Always verify the proper length of the chinstrap and adjust it as necessary, once
again referring to the specific helmet instructions.
Position the e-box in the relevant housing. First insert the front part, then press down
on the e-box until both hooks fully click. To remove the e-box, press the two sliding
hooks at the same time until the e-box comes out.
Warning: Do not leave the helmet exposed to atmospheric agents without the e-box or
the protection plate provided with the helmet.
4.
REMOVING THE SYSTEM
Fig. 31
To remove the system from the helmet,
remove the earphone and the comfort
cheek pads as shown in the assembly
operations. Then remove the polystyrene
cheek pads. Remove the protection plate,
then, looking at the helmet from the
outside, release the connector by acting on
the fastening clasp as illustrated in the
figure.
After releasing the connector from the shell, also remove the right part by releasing the
battery holder.
Now remove the entire system from the helmet.
5.
SYSTEM CHARACTERISTICS
N-Com B1 allows wireless connection to a mobile phone, a satellite navigator, and an MP3
A2DP player using Bluetooth technology.
The system can also be used for wireless intercom communication between two helmets, if
both helmets are equipped with a N-Com Bluetooth system.
The system can be expanded by means of a USB Multimedia Wire accessory (sold
separately), which is used for cable connection to multimedia sources.
B1 can be managed, updated and customised using the “N-Com Wizard”
programme, which can be downloaded from the “Download” section of the
Internet site www.n-com.it
