3.3 Free mode
Free mode is a useful functional option which allows you to remove or add effects to a
previously programmed preset. With Free mode you can also remove or add loops to the preset. To
enter Free mode press the Free mode/Bank button once. Choose loops you want to remove or add to the
circuit by pressing the corresponding footswitch. To exit Free mode press the Free mode/Bank button
once. It’s important to note that loops remain active until the next preset is applied. For a visual
indication whether you are changing presets or you are in Free mode, note that in Free mode all three
banks LED are lit, while if changing presets, only one of the corresponding presets LED is lit.
3.4 Going from Free mode to a preset from a different bank
If you want to jump to a different bank and a different preset while in Free mode, first press the
Free mode/Bank button once to exit Free Mode, after that rapidly press the Free mode/Bank button
twice to select the required bank, then simply choose a preset. The controller stores the last settings until
another loop or preset is activated.
4. Programming:
Programming is easy and is done in a few steps:
1. Hold the Program button for more than 3 seconds. All blue LEDs will light up
2. Choose loops you want to use in the preset. In this step you can change the preset bank if the
controller is currently in a different bank.
3. Press the Program preset again. Blue LEDs start flashing. Choose which preset you want to save by
pressing the corresponding footswitch.
You have now programmed the preset. Now you have 2 options: either continue programming other
presets following the above steps, or exit programming mode by pressing the Mute/Cancel button.
You can use the Mute/Cancel button to return to a previous step while programming. For example, if
you have chosen the loops you want to be in the particular preset and you have pressed Program, the
controller stands by until you choose which preset these settings should be saved to. By pressing the
Mute/Cancel button once, you can return to programming mode to edit your presets. Exit programming
mode by pressing Mute/Cancel button again.
5. Specifications:
•
12 loop channels
•
True bypass switching
•
36 independent presets stored in 3 banks
•
Free mode for faster and more flexible work
•
Fast and easy programming with just one button
•
Double reinforced heavy duty footswitches
•
High quality gold plated relays
•
Passive and buffered guitar inputs
•
Tuner output
•
External pedal insert point between effects loops 4 and 5
•
2 jacks for amp control for channel switching
•
Additional loop channels for 3 more effects in the amp’s effect loop
•
Power consumption at 18VDC – 350mA
•
Dimensions: 500(W) x 160(D) x 55(FH) x 70(RH) mm
•
Weight 3.3 kilograms
•
Warranty: 3 years warranty
www.n-audio.net
