background image

Earbuds and earbud pads 

Cover the earbuds with the protective earbud pads. 
Three different size earbud pads (small, medium and 
large) are provided (see 

figure 4.

). Choose a pad size 

that fits comfortably in your ear. Be sure to adjust the 
volume to a safe level before inserting the earbuds into 
your ears (see 

figure 5.

). The viewer ships with medium-

sized earbuds attached. 
 

 

(figure 4)                 (figure 5) 

 

Mag Clip 

Myvu shades comes equipped with a magnetic clip 
for comfortable viewing and cable management.  
Simply put the glasses on and then slip the magnetic 
clip behind your neck (see figure 6).  The clip can 
easily slide up and down the cable when slight 
pressure is applied for customized placement. 
 

 

(figure 6) 

 
Picture control 

Due to the nature of this universal product, picture 
settings may need to change to suit your specific portable 
media player.  Use the brightness and picture controls 
featured on the pendant to adjust myvu’s picture to suit 
your viewing pleasure.  Further instructions on adjusting 
the picture and brightness are listed below.

 

using the pendant controls 

You can power myvu “On” by using the power button on 
the pendant.  The pendant also allows you to control 
image contrast and brightness by holding down the 
appropriate button on the pendant. You can return the 
brightness and contrast settings to the factory default 
settings at any time by pressing the power and increase 
volume buttons simultaneously while the viewer is on. 
Figure 7 shows the button functions and layout on the 
pendant.  
 

 

 

(figure 7) 

about charging the battery 

In order to get the longest possible video experience, 
fully charge your myvu and your portable media player 
before each use. You can still watch video or listen to 
music while the battery is being charged if charging 
through a USB wall adapter. If the battery is very low, 
you may not be able to turn on the viewer until it has 
charged some.  The LED on the pendant indicates the 
charging state of your myvu: 
Solid Blue: On and detected video signal 
Blinking Blue: On but no video signal detected (check 
video sources and A/V cable connections  
Blinking Orange: Charging 
Slow Blinking Orange: Low battery 
Solid Orange: Fully charged  

 
Charging time 

The battery is designed to charge from many different 
power sources.  When using a high capacity charging 
adaptor, such as a USB wall adaptor, full charge can be 
achieved in approximately three hours.  When charging 
off of a computer, slow charge mode is in effect, which will 
take approximately eight hours to achieve full charge.

 

watching video with Made for iPod 
edition 

 

myvu set-up 1:  
Watching video with the viewer and your iPod 
Classic, nano or iPod 5

th

 generation (video) model 

 

Plug the 3.5mm end of the iPod connector cable to the 
pendant.  Connect the other end of the cable to your 
iPod.  Turn the viewer “On” by pressing the button in 
the middle of the viewer’s pendant and holding until 
the light appears.  Choose your favorite video and 
enjoy.  

 
myvu set-up 2: 
Watching video with the viewer and your iPod 
Touch 

Increase 
Volume* 
 
Control 
Brightness 
 
Control Contrast 
 
Decrease 
Volume 
 
Power* 
 
 
*Reset factory 
settings by 
depressing 
these buttons 
simultaneously 

 

Содержание shades301








Отзывы: