MyTek The Brooklyn, Руководство пользователя

Страница: 15 / 20

User’s Manual 15
9.2.6 MQA Decoder
• Enabled (ENBL) – MQA decoder is activated. The filter is fixed at minimum phase.
• Disabled (DSBL) – to enable Mastering menu the MQA must be switched off.
9.2.7 Mastering
– these are additional functions intended for pro audio applications.
Available only when the MQA is disabled.
• Off – default
• Mono – sums left and right channel to mono.
• L- R - Subtracts one channel from the other, canceling out mono information while leaving the
stereo information.
• MS - A combination of Mono (L+R) and L -R, the mid signal is the sum of L and R (mono) and the
side signal is the stereo information from the L– R operation.
9.2.8 Phase
– phase switch
• Pos - default
• Neg – the signal phase is inverted
9.2.9 Main Balance
– audio balance control
9.2.10 Vol Control
• ANLG (Analog) - the output level is controlled by the analog fader.
• DGTL (Digital) - the output level is controlled digitally with ultra precision digital attenuator.
9.2.11 Bypass
Relay bypass of all faders for the cleanest output path possible. Only the main outputs are affected
while the headphone output is still controlled by analog fader.
Attention! To prevent damage your speakers reduce the output
level of your preamp BEFORE activating “Bypass” mode.
9.2.12 Analog Input
(Analog Input Mode) - A pair of unbalanced analog inputs can be selected in addition to all available
digital inputs. As with other inputs, it can be routed via the analog stepped attenuator to both main
outputs and headphones. One of three modes can be selected:
• LINE - line level input
• P MM - phono premap, for Moving Magnet cartridges
• P MC – phono preamp, for Moving Coil cartridges
9.2.13 Coax Function
RCA digital inputs can operate in two modes:
• SPDIF - S/PDIF digital mode.
• SDIF - SDIF digital mode, RCA - BNC adapters are required, these are not included in the bundle.
9.2.14 PCM Filt Shpe (PCM Filter Shape)
• MPH (Minimum Phase)
• SR (Slow Roll-Off)
• FR (Fast Roll-Off)
Note! When MQA is enabled the filter is fixed at „minimum phase”
and all above settings are not available.