MyTek SS-900 Скачать руководство пользователя страница 10

SS-900 Rev. A

OWNER’S MANUAL

10

MYTEK AMERICA 

4.6  Time Start Mode (If remote start is installed)

Time start mode means that the system automatically starts your car vehicle once every day at the programmed
time.   This feature is useful if you need to warm up your vehicle everyday at the same time. (For example: If you
want your vehicle to start at 8:00 AM everyday, program this feature at 8:00 AM.)  You can set up two different start
times.

To activate the TIME START MODE:
1. At a time when you want to start your vehicle automatically, program this mode. (For example: If you want

your vehicle to start at 8:00 AM everyday, program this feature at 8:00 AM.)

2. With your vehicle key in key cylinder, turn it to the ignition on position (Driving Position).
3. Within five (5) seconds, PRESS AND HOLD THE PROGRAM SWITCH BUTTON. The program switch is

located on the antenna.

4. Within five (5) seconds, PRESS AND HOLD THE TRANSMITTER BUTTON #1 OR #2 for five (5) seconds.

(#1 sets one automatic engine start time and #2 sets another automatic engine start time)

5. The time start mode is confirmed with one chirp sound and one parking light flash.
6. If remote start reservation is completed (see 3.11), the vehicle will start once every day at the same time

(once every 24 hours).

To deactivate the TIME START MODE:
1. At any time of the day, you can cancel time start mode.
2. With your vehicle key in the key cylinder, turn it to the ignition on position (Driving Position).
3. Within five (5) seconds, PRESS AND HOLD THE PROGRAM SWITCH BUTTON. The program switch is

located on the antenna.

4. Within five (5) seconds, PRESS AND HOLD THE TRANSMITTER BUTTON #3 for five (5) seconds.
5. The operation is confirmed with two chirp sounds and two parking light flashes.

4.7  Emergency Disarm Secrete Key Program (Factory Default Setting:  11)

Emergency Disarm requires two secrete keys.  These secrete keys can be customized to ensure personalized
security.

To Program new Secrete Key:
1. With your vehicle key in the key cylinder, turn it to ignition position (Driving Position).
2. Within five (5) seconds, press and release the transmitter button #2,#3,#2,#1 in succession.
3. The Secrete Key Program Mode is confirmed with one horn chirp sound and one parking light flash.
4. Within five (5) seconds, PRESS AND RELEASE THE TRANSMITTER BUTTON #1 between 1-9 times. This

number will be the Secrete Key #1.

5. PRESS AND RELEASE THE TRANSMITTER BUTTON #3 to program the Secrete Key #1.  The value of the

Secrete Key #1 will be confirmed by chirp sounds and light flashes.

6. Within five (5) seconds, PRESS AND HOLD THE TRANSMITTER BUTTON #2 between 1-9 times.  This

number will be the Secrete Key #2.

7. PRESS AND RELEASE THE TRANSMITTER BUTTON #3 to program the Secrete Key #2.  The value of the

Secrete Key #2 will be confirmed by chirp sounds and light flashes.

8. Turn your vehicle key to off position.  Two chirp sounds and two light flashes will confirm the completion of

the Secrete Key programming.

Press PRS

2 Times

Press #1

for 5 Sec.

1 Chirp (on)
2 Chirps (off)

1 Light Flash (on)
2 Light Flashes (off)

Turn Ignition 

On

Содержание SS-900













Отзывы: